Juniper Learning Bytes - Home

Learn how to setup and configure ATP Cloud. This video is most appropriate for users who are new to working with ATP Cloud.

Learn how to configure Adaptive Threat Profiling feeds and sensors. This training is most appropriate for users who are familiar with SRX Series devices.

Learn how to configure Data Center ESI LAG video covers how to configure and verify ESI LAG interfaces in the data center. This video is most appropriate for users that are familiar with data center technologies.

Learn how to configure a Data Center Overlay - EBGP video covers how to configure the overlay network of a data center using EBGP. This video is most appropriate for users that are familiar with data center technologies.

Learn how to configure a Data Center Underlay - EBGP video covers how to configure the underlay network of a data center using EBGP. This video is most appropriate for users that are familiar with data center technologies.

Learn how to configure Juniper Secure Connect using the Junos CLI. This video is most appropriate for users who are new to working with Juniper Secure Connect.

Learn how to configure Juniper Secure Connect using J-Web. This video is most appropriate for users who are new to working with Juniper Secure Connect.

Learn how to configure Juniper Secure Connect using J-Web. This training is most appropriate for users who are new to working with Juniper Secure Connect.

Learn how to configure MAC VRF - VLAN Aware video covers how to configure and verify the MAC VRF VLAN Aware service type in the data center. This video is most appropriate for users that are familiar with data center technologies.

Learn how to configure port mirroring for an EX Series and QFX Series devices using Junos ELS software . This training is most appropriate for users who are new to working with EX and QFX Series devices that are using Junos ELS software.

Learn how the cSRX Docker Compose video demonstrates using Docker Compose to deploy cSRX instances.

Learn how to configure firewalls with filter-based forwarding on data center devices. This video is most appropriate for users with a high degree of knowledge and skill with data center technologies.

Learn how to verify filter-based forwarding on data center devices. This video is most appropriate for users with a high degree of knowledge and skill with data center technologies.

Learn how to configure router leafs with filter-based forwarding on data center devices. This video is most appropriate for users with a high degree of knowledge and skill with data center technologies.

Learn how to use Amazon Web Services CloudFormation to deploy vSRX instances in AWS.

Learn how to The Deploying GNFs with Junos Node Slicing Learning Byte covers how to work with GNFs within a Junos Node Slicing environment. This Learning Byte is most appropriate for users who are new to working with Junos Node Slicing or anyone looking for a quick-start guide of how to deploy GNFs with Junos Node Slicing.

Learn how to deploy the Juniper vMX router on GNS3 platform which a great tool for learning and testing network scenarios.

Learn how to deploy a vQFX sandbox in a nested Linux VM. You will also learn how to create your own scenario with vagrant and vQFX.

Learn how to deploy vSRX on a Hyper-V host and how to secure your Hyper-V virtual machine workloads with vSRX.

This video demonstrates the process of using the EZQoS configuration template on EX Series platforms. This training is most appropriate for administrators who need to perform CoS configuration on their network.

Learn how to examine a Paragon Insights Installation video demonstrates using the kubectl utility to examine a Paragon Insights installation.

Learn how use a USB device to provide extra storage for an EX Series device. This training is most appropriate for users who are new to working with Junos.

This video covers how to configure and verify GRE tunnels with routing instances on SRX Series devices. This training is most appropriate for users who are new to working with GRE tunnels and routing instances.

Learn how to work with Implementing Full-Mesh VPN on SRX Series devices using Junos Space Security Director. This training is most appropriate for users who are new to working with Implementing Full-Mesh VPN on SRX Series devices with Security Director or anyone looking for a quick-start guide of how to work with Implementing Full-Mesh VPN using Security Director on SRX Series devices.

Learn how to configure integrated user firewall using J-Web. This training is most appropriate for users who are new to working with integrated user firewall or anyone looking for a quick-start guide of how to configure integrated user firewall using J-Web.

Learn how to using Junos PyEZ to issue Junos operational mode commands.

Learn how to using Junos PyEZ to manage a Junos rescue configuration.

This video demonstrates the process of configuring and verifying MACSec configuration on EX Series platforms. This training is most appropriate for administrators who need to perform MACSec configuration on their network.

Learn how to use Python and the AWS Boto3 Python library to manage AWS vSRX EC2 instance state.

Learn how to use wildcards in CoS forwarding policy to select MPLS LSP forwarding paths based on the name of an LSP.

Learn how to work with intra-VLAN next-generation Ethernet switching on SRX Series devices. This training is most appropriate for users who are new to working with or for users looking for a quick-start guide on intra-VLAN next-generation Ethernet switching on SRX Series devices.

Learn how to configure and run tests within Paragon Active Assurance. This video is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how to configure the DNS task with a monitor using the Control Center Web interface. This video is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how to configure a Multisession TCP test using the Control Center Web interface. This video is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how to configure the Multicast UDP task with a test using the Control Center Web interface. This video is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how to configure a Path MTU Discovery test using the Control Center Web interface. This video is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how to configure a Path Trace test using the Control Center Web interface. This Learning Byte is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how to configure the VoIP UDP task with a test using the Control Center Web interface. This video is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how to use a Python script with Paragon Active Assurance to view the status of Test Agents. This video is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how to configure and use test templates within Paragon Active Assurance. This video is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how the Paragon Pathfinder Network Topology video discusses how Paragon Pathfinder discovers a network topology and examines a network topology using the Paragon Pathfinder UI.

The Password-less Public Key-based Encrypted SSH Authentication on Junos learning byte shows users how to enable ssh key based authentication on Junos devices which can aid automation and security.

Learn how to watch Junos cli output real time without typing commands repeatedly.

Learn how to schedule multiple Junos commands to be run automatically with Junos event-options feature.

Learn how the Seamless EVPN-VXLAN Stitching – EVPN and VXLAN Parameters video covers how to configure the EVPN and VXLAN parameters for seamless EVPN-VXLAN stitching. This video is most appropriate for users with a high degree of knowledge and skill with data center technologies.

Learn how the Seamless EVPN-VXLAN Stitching – Verification video covers how to verify seamless EVPN-VXLAN stitching operations. This video is most appropriate for users with a high degree of knowledge and skill with data center technologies.

Learn how to work with SSL Proxy - Client Protection in the Junos CLI. This training is most appropriate for users who are new to working with SSL Proxy - Client Protection or anyone looking for a quick-start guide of how to work with SSL Proxy - Client Protection.

Learn how to configure the anti C&C functionality with Sky ATP. This training is most appropriate for users who are new to working with Sky ATP or anyone looking for a quick-start guide of how to configure the anti C&C functionality with Sky ATP.

Learn how to register Paragon Active Assurance Test Agent native application devices. This video is most appropriate for users who are new to working with Paragon Active Assurance.

Learn how to troubleshoot Adaptive Threat Profiling issues that are related to downloading feeds. This training is most appropriate for users who are familiar with SRX Series devices.

Learn how to troubleshoot Juniper Secure Connect problems. It is most appropriate for users who are new to working with Juniper Secure Connect.

Learn how to troubleshoot Juniper Secure Connect problems. It is most appropriate for users who are new to working with Juniper Secure Connect.

Learn how to use the the Juniper/PyEZ Docker container to execute PyEZ scripts and how to use the Device.facts function to retrieve specific device properties. This training is for those wanting to learn how to automate Junos with PyEZ.

This video provides an overview of UTM Antivirus on Juniper devices.

This video demonstrates the process of configuring and verifying aliases for Virtual Chassis members on EX Series Switches. This training is most appropriate for administrators who need to more easily identify Virtual Chassis members.

Learn how to setup vSRX with GNS3 for educational purposes. It is most appropriate for users who are new to working vSRX.

This video covers the theory and configuration of Anycast-RP as well as an example of configuring Anycast-RP and PIM Anycast. This training is most appropriate for users who need a basic understanding of Anycast-RP and PIM-Anycast and how to configure and test it.

Learn how to handle asymmetric traffic with SRX Series devices. This training is most appropriate for users who need a basic understand of asymmetric traffic flows or anyone looking for a quick-start guide of how to asymmetric traffic flows with SRX Series devices. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.

This video covers how to configure and monitor segment routing using ISIS. This training is most appropriate for users who are new to working with segment routing.

This video covers how to configure an SRX Series device to log basic session information This training is most appropriate for users who are new to working with SRX Series devices or anyone looking for a quick-start guide of how to configure basic session logging on an SRX device. For more on this subject, attend the Advanced Junos Security (AJSEC) course.

This video explains how BGP authentication works and demonstrates how it is enabled in the configuration of a Junos device This training is most appropriate for administrators and network designers who are responsible for managing Junos platforms. If you're interested in more, check out the Junos Intermediate Routing (JIR) course.

This video covers how to use BGP well-known communities in the Junos OS. This training is most appropriate for users who are familiar with using routing policies and communities to apply or change BGP route attributes in the Junos OS.

Learn how to build and deploy VLAN profiles in the Junos Space Network Director application. This training is most appropriate for users who are new to working with Network Director or anyone looking for a quick-start guide of how to work with Network Director profiles.

This video provides an introduction to the major components of CoS implementation on Junos devices. This video is the third in the series, digging into more detail on the policing component of Junos CoS. This training is most appropriate for users who want an overview of implementing CoS on Junos devices.

Configuration archival allows you to have the most recent configuration file automatically backed up to a remote device. The archival can be done when issuing a commit or at specific time intervals. This training demonstrates the configuration archival syntax and demonstrates how to check the success or failure of the file transfer.

This video covers how to configure and verify control plane DDoS protection. This training is most appropriate for users who are new to working with control plane DDoS protection.

This video covers how to configure and verify load balancing on Junos devices using the CLI. This training is most appropriate for users who are new to working with load balancing on Junos devices or anyone looking for a quick-start guide of how to work with load balancing on Junos devices.

This video discusses the configuration of a secure VPN tunnel between two Juniper Networks SRX-series devices. The concept of route-based VPN is briefly discussed and the commands needed to configure and monitor the VPN are shown. This training is appropriate for beginner to intermediate level engineers who want to start configuring IPsec VPNs on their SRX devices.

This video covers various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.

This video covers how to configure and use the SRX device as a DHCP server. This training is most appropriate for users who are new to working with SRX Series devices or anyone looking for a quick-start guide of how to configure an SRX device as a DHCP server.

This video cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.

This video provides the steps required to recover from an unknown root password. This training is appropriate for all users of the Juniper CTP solution.

This video introduces the BGP flow spec which is described in RFC 5575 as a way to propagate flow specific rules effectively to mitigate a DDoS attack and suggests the effective model of DDoS monitoring systems with BGP flow spec. BGP 플로우 스팩을 사용한 DDoS 경감 러닝바이트는 DDoS 공격을 효과적으로 경감시키기위해 플로우 스팩 정책들을 전파하기 위한 방법으로 RFC 5575에 정의된 BGP 플로우 스팩을 소개합니다. 또한 BGP 플로우 스팩을 사용한 효과적인 DDoS 모니터링 시스템을 제시합니다.

This video provides implementation details on deploying MVRP in a Layer 2 network. This training is appropriate for users implementing hierarchical Layer 2 networks using EX and QFX Series switches.

This video covers how to deploy Virtual Router Reflector (VRR) on VMWare ESXi 6.0. This training is appropriate for network administrators who are trying to deploy vRR inside ESXi environment.

This video covers how to configure MAM for DiffServ-aware TE. This training is most appropriate for users who are new to working with DiffServ-aware TE or anyone looking for a quick-start guide of how to configure MAM for DiffServ-aware TE LSPs.

This video introduces basic Docker networking concepts and commands. This training is appropriate for those new to Docker.

This video demonstrates using the file checksum command to verify the integrity of a Junos software installation file.

This video explains the format, syntax and basic functionality of firewall filters on devices running the Junos OS.

This video describes using operational mode cli commands to create and display a JUNOS device rescue configuration file. This training is most appropriate for administrators who are responsible for managing Junos device configuration.

This video covers how to configure and troubleshoot BGP over IPsec on SRX Series devices. This training is most appropriate for users who are looking to understand how to implement BGP over IPsec with SRX Series devices. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.

This video covers how to configure and troubleshoot OSPF over IPsec on SRX Series devices. This training is most appropriate for users who are looking to understand how to implement OSPF over IPsec with SRX Series devices. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.

This video illustrates how to use KVM to instantiate a vMX device.

This video discusses enabling the interface uplink failure detection feature on a Junos OS-based platform.

This video covers configuring static paths for RSVP-signaled label-switched paths (LSPs) in the Junos OS. This training is most appropriate for users who are just beginning to configure and use RSVP in the Junos OS, or anyone looking for a quick-start guide for basic RSVP path configuration in the Junos OS. To get the most from this training, users should be familiar with the material covered in the MPLS Basics video and the Intermediate MPLS: Basic RSVP-Signaled LSPs video.

This video introduces basic containerization concepts and the Docker container runtime. This training is most useful for those new to Docker.

This video provides an overview of Kubernetes and is most appropriate for those new to Kubernetes or network automation.

This video describes the IPv6 addressing scheme and compares IPv6 to IPv4. A demonstration is provided to illustrate how an IPv6 address can be easily added to an interface using the Junos CLI. This training is most appropriate for intermediate users who are unfamiliar with the IPv6 addressing scheme.

This video discusses adding SRX Series devices to the Juniper Sky Enterprise application.

This video discusses using the Juniper Sky Enterprise application to centrally deploy security policies to multiple SRX Series devices.

Este video explica el concepto de login classes en Junos OS. Es apropriado para administradores que desean controlar derechos y permisos en el Junos OS.

This video shows you the appropriate connection and terminal requirements for connecting to a Factory Defaulted Junos device. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos.

This video shows you how to log in as root on a factory defaulted Junos device. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos.

This video demonstrates using the operational mode set cli command to configure options for an administrator’s CLI session on a Junos platform.

This video describes using operational mode cli commands to display a Junos device serial number. This training is most appropriate for administrators who need provide a device serial number for support, licensing, or inventory. If you’d like to learn more basic Junos commands, take the Introduction to the Junos Operating System (IJOS) course available in instructor-led or self-paced ‘labs and learning’ versions.

This video covers the basic procedure for recovering the password on a Junos device. This training is most appropriate for new users of the Junos OS or anyone looking to become more familiar using the password recovery procedure.

Policy Locking is a new feature that was introduced in Security Director version 12.2. This video provides you with an overview of policy locking, and will demonstrate how it can be applied to a policy within Security Director. This training is appropriate for users who are just beginning to use Junos Space Security Director or users who have not yet seen the policy locking feature introduced in version 12.2

This video covers the new Junos Web App Secure appliance and provides an overview of the Configuration and Security Monitoring interfaces used to manage and monitor Junos Web App Secure. This training is appropriate for individuals who are new to using Junos WebApp Secure series of products.

This video provides an overview of command line basics using Python 2.7 interpreter and PYEZ libraries. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos Automation.

This video will provide an overview of configuring aggregated Ethernet interfaces. The configuration of aggregated Ethernet interfaces enables multiple Ethernet interfaces to be grouped together and form a single link layer interface also know as a link aggregation group (LAG). A step-by-step demo will illustrate the configuration of a LAG on an EX Series switch. This training is most appropriate for users unfamiliar with LAG configuration using the Junos OS.

This video demonstrates how to configure Junos to display a message before the login prompt for all administrators connecting to a network device. This training is most appropriate for administrators who are responsible for managing or securing Junos platforms. If you want to learn more about securing Junos devices, sign up for the Junos Security (JSEC) course.

This video illustrates how to use virt-manager to manage bridges in a KVM hypervisor.

This video provides a brief and simple demonstration of setting up a single Mist Access Point. This training is ideal for engineers that are new to working with Mist access points.

This video covers basic steps for initial MPLS configuration in the Junos OS. This training is most appropriate for users who are just beginning to use MPLS features of the Junos OS, or anyone looking for a quick-start guide for basic MPLS configuration in the Junos OS.

This video covers the theory and configuration of Multicast Source Discovery Protocol (MSDP) as well as an example of configuring MSDP and anycast-RP. This training is most appropriate for users who need a basic understanding of MSDP and how to configure and test the protocol.

This video introduces NETCONF, XML and XPath and how they can be incorporated into automation.

This video covers configuring OSPF to support segment routing.

This video explains the options and functionality of OSPFv2 authentication for devices running the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to enable OSPFv2 authentication on Junos-based devices.

This video explains the fundamentals of how hello and dead timers work between OSPF neighbors, in particular on devices running the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to better understand OSPF timers on Junos-based devices.

This video discusses the OSPF 2-way state 'problem' that can occur on broadcast and NBMA networks. With a short lecture followed by a demonstration, this training is appropriate for intermediate users, or anyone looking to better understand OSPF neighborship and adjacency formation on broadcast/NBMA networks.

This video covers how to configure static NAT on SRX Series devices to overcome problems with overlapping IP addresses. This training is most appropriate for users who are looking to understand how to configure static NAT on SRX Series devices to overcome problems with overlapping IP addresses. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.

This video is appropriate for new users of the Junos Operating System to assist them in understanding the differences between using plain-text and encrypted passwords when configuring login parameters. There is a short lecture followed by a demonstration that covers when and why you should choose to use each configuration method as well as how not to use the encrypted password method.

This video covers the function of Proxy ARP in an enterprise network and how it works with NAT on an SRX device. This training is most appropriate for intermediate users of Junos or anyone looking to learn about Proxy ARP.

This video describes using the operational mode request support information command to collect relevant information and resolve a support case. This training is most appropriate for administrators who need provide diagnostic information to Juniper Networks to resolve a support case.

This video provides details on Junos route preference and active route selection. This training is most appropriate for new users of Junos or anyone looking to learn about Route Preference.

There are many use cases where it's necessary to share routes between routing tables. The instance-import feature provide the ability to easily share routes between routing-instances on a Junos device. This training is appropriate for new users, or anyone looking to learn about enabling the instance-import feature on Junos-based devices.

This video covers the functionality of router IDs in a network that uses dynamic routing protocols. This training is most appropriate for new users of Junos or anyone looking to learn about Router IDs.

This video explores the search capabilities of Security Threat Response Manager (STRM). After viewing this training, you will understand the capabilities of the Search and Filter functions on the STRM system.

This video demonstrates adjusting the routing preference value for a segment routed LSP.

This video covers how to configure and verify segment routing traffic engineering. This training is most appropriate for users who are new to working with segment routing.

This video covers monitoring infected hosts within Sky ATP. It also covers how to use Sky ATP threat prevention policies on SRX series devices using J-Web. This training is most appropriate for users who are new to working with Sky ATP.

This video covers how to configure Sky ATP SMTP email protection using J-Web. This training is most appropriate for users who are new to working with Sky ATP SMTP email protection.

This video covers how to configure Sky ATP Web protection using the CLI. This training is most appropriate for users who are new to working with Sky ATP Web protection.

IPSec encrypts data that goes into a certain tunnel based on a agreed Security Association (SA), whereby each Phase 2 SA is defined for a unidirectional data flow covering data traffic that is distinguishable by a so called proxy-ID. In IKEv2 there is a new term called traffic-selector which serves the same purpose as the proxy-ID, however traffic-selector is something that can be defined on an per-SA basis using the two fields, source IP address and destination IP address. The traffic-selector helps to define source and destination patterns that are allowed through a route-based VPN tunnel and helps to enforce data to SA mapping and thus prevents traffic from being transported through the tunnel that there is no negotiation existing for. This training demonstrates how to configure route-based VPNs on Juniper SRX series devices.

This video discusses enabling the J-Web interface to administer an SRX Series security device.

This video covers Source Specific Multicast operation and configuration on Junos devices. This video also covers features to allow user devices to intercommunicate with user PCs that are not IGMP version 3 capable in a SSM environment. This video also shows commands that allow for interaction between IGMP version 2 and 3 devices. This training is most appropriate for users that have attended the Introduction to the Junos Operating System (IJOS) and Junos Intermediate Routing (JIR) courses or have equivalent experience.

This video covers how to configure static routing using J-Web. This training is most appropriate for users who are new to working with static routing or anyone looking for a quick-start guide of how to configure static routing using J-Web.

The Topology Independent In-Service Upgrade (TISSU) feature allows in-service software upgrades on the QFX5100 and EX4600 Series switches without redundant hardware-based Routing Engines. This training is appropriate for users interested in performing a TISSU on their QFX5100 and EX4600 Series switches.

This video covers how unified policy processing order on SRX devices functions. This training is most appropriate for users who are new to working with unified policies on SRX devices or anyone looking for a quick-start guide of how to work with unified policies on SRX devices.

This video covers how to manage users on SRX Series devices with Security Director. This training is most appropriate for users who are new to working with Security Director.

This video covers how to zeroize multiple Junos devices with Ansible. This training is most appropriate for users who are looking to automate deployment of multiple Junos devices using Ansible.

This video covers how to use dynamic applications with unified policies on SRX devices using the CLI. This training is most appropriate for users who are new to working with dynamic applications and unified policies on SRX devices or anyone looking for a quick-start guide of how to work with dynamic applications and unified policies on SRX devices.

This video describes the IPv6 addressing scheme and compares IPv6 to IPv4. A demonstration is provided to illustrate how an IPv6 address can be easily added to an interface using the Junos CLI. This training is most appropriate for intermediate users who are unfamiliar with the IPv6 addressing scheme.

This video covers how to configure routing instances on SRX Series devices using Security Director. This training is most appropriate for users who are new to working with Security Director.

This video covers how to configure and monitor screens on SRX series devices with Security Director. This training is most appropriate for users who are new to working with SRX Series devices.

This video covers how to configure and monitor screens on SRX series devices with the J-Web. This training is most appropriate for users who are new to working with SRX Series devices.

This video covers how to configure security zones with Security Director for SRX Series devices. This training is most appropriate for users who are new to working with security zones and Security Director.

This video covers how to configure static routes with the CLI. This training is most appropriate for users who are new to working with Junos.

This video covers how to encrypt passwords securely in Junos using the master password feature. This training is most appropriate for users who are new to working with Junos.

This video covers how to configure Policy Enforcer using the Policy Enforcer wizard in Security Director. This training is most appropriate for users who are new to working with Policy Enforcer.

This video covers how to configure UTM content filtering using J-Web. This training is most appropriate for users who are new to working with UTM content filtering on SRX devices or anyone looking for a quick-start guide of how to work with UTM content filtering using J-Web on SRX devices.

This video demonstrates retrieving and installing a 60-day trial license on a vMX platform.

This video covers 6PE which allows Service Providers to provide new revenue-generating services to their customers by offering native IPV6 connectivity without the need to upgrade the provider (P) core routers and with no impact on existing IPv4 and MPLS services.

This video demonstrates using the wildcard delete command to remove multiple objects from a Junos device configuration file.

This video shows you the different methods (RingMaster and CLI) you can use to create a VLAN and ways to verify and test the configuration. This training is appropriate for all users of the Juniper Wireless LAN system or anyone looking to learn more about how to create a VLAN on the Juniper Wireless Solution.

This video covers how to configure and use Policy Enforcer in Security Director. This training is most appropriate for users who are new to working with Policy Enforcer.

Zero Touch Provisioning (ZTP) is a feature used on Juniper Networks switches to automate day one provisioning tasks. This training is appropriate for users interested in automating the deployment of EX and QFX Series switches in their network environment.