Juniper Learning Bytes - Home

Juniper Learning Bytes - Home 
Learning Bytes videos are short and concise tips and instructions that provide quick answers, clarity, and insight into specific features and functions of Juniper technologies.


 
Automating Junos Using BASH Scripts
The Automating Junos Using BASH Scripts learning byte shows users how to automate Junos administration with bash and ssh.
Configuring Adaptive Threat Profiling Part 1
Learn how to configure Adaptive Threat Profiling feeds and sensors. This training is most appropriate for users who are familiar with SRX Series devices.
Configuring Adaptive Threat Profiling Part 2
Learn how to configure Adaptive Threat Profiling enforcement points. This training is most appropriate for users who are familiar with SRX Series devices.
Configuring AF Interfaces with Junos Node Slicing
Learn how to work with AF interfaces on MX devices within a Junos Node Slicing environment. This training is most appropriate for users who are new to working with AF interfaces and Junos Node Slicing or anyone looking for a quick-start guide of how to work with AF interfaces and Junos Node Slicing.
Configuring Encrypted Traffic Insights
Learn how to configure Encrypted Traffic Insights using the Junos CLI. This training is most appropriate for users who are new to working with Encrypted Traffic Insights.
Configuring Juniper Secure Connect - Security Director

Learn how to configure Juniper Secure Connect using Junos Space Security Director. This training is most appropriate for users who are new to working with Juniper Secure Connect.

Configuring Juniper Secure Connect – CLI

Learn how to configure Juniper Secure Connect using the Junos CLI. This training is most appropriate for users who are new to working with Juniper Secure Connect.

Configuring Juniper Secure Connect J-Web
Learn how to configure Juniper Secure Connect using J-Web. This training is most appropriate for users who are new to working with Juniper Secure Connect.
Configuring Juniper Secure Connect J-Web
Learn how to configure Juniper Secure Connect using J-Web. This training is most appropriate for users who are new to working with Juniper Secure Connect.
Configuring LAG Interfaces - Security Director
This video covers how to configure LAG interfaces on SRX Series devices using Security Director. This training is most appropriate for users who are new to working with LAG interfaces on SRX devices.
Configuring LLDP on vSphere Distributed Switches and QFX5100s
Learn how to configure QFX5100 switches and vSphere distributed switches with Link Layer Discovery Protocol (LLDP).
Configuring Port Mirroring: EX Series and QFX Series
Learn how to configure port mirroring for an EX Series and QFX Series devices using Junos ELS software . This training is most appropriate for users who are new to working with EX and QFX Series devices that are using Junos ELS software.
Configuring Tap Interfaces: SRX Series
Learn how to configure tap interfaces on Juniper SRX Series devices. This training is most appropriate for users who are familiar with SRX Series devices.
Connecting to AWS vSRX Instances

Learn how to use use SSH to connect to vSRX instances deployed in AWS.

Deploy AWS vSRX Instances Using Terraform
Learn how to using Terraform to deploy AWS vSRX instances.
Deploy vSRX Instances Using AWS CloudFormation
Learn how to use Amazon Web Services CloudFormation to deploy vSRX instances in AWS.
Deploy vSRX Instances Using Azure Resource Manager (ARM)
Learn how to use (ARM) to deploy vSRX instances in Microsoft Azure. This training is most appropriate for users new to ARM
Deploying GNFs with Junos Node Slicing
Learn how to work with GNFs within a Junos Node Slicing environment. This training is most appropriate for users who are new to working with Junos Node Slicing or anyone looking for a quick-start guide of how to deploy GNFs with Junos Node Slicing.
Deploying vQFX Sandbox in a Nested Linux VM
Learn how to deploy a vQFX sandbox in a nested Linux VM. You will also learn how to create your own scenario with vagrant and vQFX.
Deploying vSRX in a Microsoft Hyper-V Host
Learn how to deploy vSRX on a Hyper-V host and how to secure your Hyper-V virtual machine workloads with vSRX.
EX Series EZQoS
This video demonstrates the process of using the EZQoS configuration template on EX Series platforms. This training is most appropriate for administrators who need to perform CoS configuration on their network.
EX Series Management Access
This video demonstrates the process of enabling management access on EX Series switches. This training is most appropriate for administrators who administer their EX Series remotely.
Extra USB Storage for EX Series Devices
Learn how use a USB device to provide extra storage for an EX Series device. This training is most appropriate for users who are new to working with Junos.
Find The Right RPC Using REST API Explorer
Learn how to using the REST API Explorer to determine the correct Junos RPC.
GRE Tunnels with Routing Instances
This video covers how to configure and verify GRE tunnels with routing instances on SRX Series devices. This training is most appropriate for users who are new to working with GRE tunnels and routing instances.
GRE Tunnels with SRX
This video covers how to configure and verify GRE tunnels with SRX Series devices. This training is most appropriate for users who are new to working with GRE tunnels on SRX devices.
Implementing Full-Mesh IPsec VPN Using Security Director
Learn how to work with Implementing Full-Mesh VPN on SRX Series devices using Junos Space Security Director. This training is most appropriate for users who are new to working with Implementing Full-Mesh VPN on SRX Series devices with Security Director or anyone looking for a quick-start guide of how to work with Implementing Full-Mesh VPN using Security Director on SRX Series devices.
Installing IPS Signatures with J-Web
Learn how to install IPS signatures on SRX Series devices using J-Web. This training is most appropriate for users who are new to working with the IPS signatures on SRX Series devices or anyone looking for a quick-start guide of how to install IPS signatures with J-Web on SRX Series devices.
Integrated User Firewall
Learn how to configure integrated user firewall using J-Web. This training is most appropriate for users who are new to working with integrated user firewall or anyone looking for a quick-start guide of how to configure integrated user firewall using J-Web.
J-Web Application Package for EX Series Switches
This video demonstrates the process of updating the J-Web Platform Package on EX Series switches. This training is most appropriate for administrators who administer their EX Series switches using the J-Web interface.
Junos Configuration for Junos PyEZ

Learn how to configuring Junos platforms to support Junos PyEZ automation.

Junos PyEZ
Learn how to installing Junos PyEZ and using it to retrieve Junos device facts.
Junos PyEZ Authentication

Learn how to configuring SSH public key authentication to support Junos PyEZ automation.

Junos PyEZ Azure vSRX Configuration
Learn how to using Junos PyEZ to configure vSRX instances running in Microsoft Azure.
Junos PyEZ Operational Commands
Learn how to using Junos PyEZ to issue Junos operational mode commands.
Junos PyEZ Read the Docs
Learn how to using the Junos PyEZ read the docs documentation.
Junos PyEZ Rescue Config
Learn how to using Junos PyEZ to manage a Junos rescue configuration.
Junos PyEZ Secure Copy
Learn how to using Junos PyEZ to securely transfer Junos files.
MACSec Configuration on EX Series Switches
This video demonstrates the process of configuring and verifying MACSec configuration on EX Series platforms. This training is most appropriate for administrators who need to perform MACSec configuration on their network.
MACsec on SRX Series Devices
Learn how to configureand monitor MACsec on SRX Series devices. This training is mostappropriate for users who are new to working with MACsec or anyone looking fora quick-start guide of how to work with MACsec on SRX Series devices.
MPLS Forwarding Using CoS Forwarding Policy and Wildcards
Learn how to use wildcards in CoS forwarding policy to select MPLS LSP forwarding paths based on the name of an LSP.
Network Director CoS Profiles
This video demonstrates the process of using Junos Space Network Director CoS profiles to configure and deploy CoS configuration to EX Series devices. This training is most appropriate for administrators who need to centrally manage CoS configuration on their network.
Network Director Filter Profiles
This video demonstrates the process of using Junos Space Network Director Filter Profiles to configure and deploy firewall filter configuration to EX Series platforms. This training is most appropriate for administrators who need to centrally manage firewall filter configuration on their network.
Next-Generation Ethernet Switching - Inter-VLAN on SRX Series Devices
Learn how to work with inter-VLAN next-generation Ethernet switching on SRX Series devices. This training is most appropriate for users who are new to working with next-generation Ethernet switching SRX Series devices or anyone looking for a quick-start guide of how to work with next-generation Ethernet switching on SRX Series devices.
Next-Generation Ethernet Switching - Intra-VLAN on SRX Series Devices
Learn how to work with intra-VLAN next-generation Ethernet switching on SRX Series devices. This training is most appropriate for users who are new to working with or for users looking for a quick-start guide on intra-VLAN next-generation Ethernet switching on SRX Series devices.
Password-less Public Key-based Encrypted SSH Authentication on Junos
The Password-less Public Key-based Encrypted SSH Authentication on Junos learning byte shows users how to enable ssh key based authentication on Junos devices which can aid automation and security.
Protect Junos Configuration From Accidental Deletion or Change
Learn how to protect Junos configs from accidental deletion or change. Users get to know how to unprotect a protected config hierarchy as well.
Realtime Capture of Junos CLI Commands Through Refresh
Learn how to watch Junos cli output real time without typing commands repeatedly.
Schedule Junos Operational Commands Without Using Scripts
Learn how to schedule multiple Junos commands to be run automatically with Junos event-options feature.
Secure Wire
In this video we will configure interfaces ge-0/0/1 and ge-0/0/3 as part of the secure wire VLAN. We will then go to [edit security forwarding options secure-wire] hierarchy and put the interfaces in a secure-wire called SW. We will then add the secure wire interfaces to a security zone and create a security policy that allows the traffic.
Security Director with Integrated Log Collector
Learn how to work with Integrated Log Collector on Junos Space Security Director. This training is most appropriate for users who are new to working with Integrated Log Collector on Junos Space Security Director or anyone looking for a quick-start guide of how to work with Integrated Log Collector on Junos Space Security Director.
SSL Proxy - Client Protection
Learn how to work with SSL Proxy - Client Protection in the Junos CLI. This training is most appropriate for users who are new to working with SSL Proxy - Client Protection or anyone looking for a quick-start guide of how to work with SSL Proxy - Client Protection.
SSL Proxy - Client Protection with Security Director
Learn how to work with SSL Proxy - Client Protection with Security Director. This training is most appropriate for users who are new to working with SSL Proxy - Client Protection in Security Director or anyone looking for a quick-start guide of how to work with SSL Proxy - Client Protection in Security Director.
SSL Proxy - Server Protection
Learn how to work with SSL Proxy - Server Protection in the Junos CLI. This training is most appropriate for users who are new to working with SSL Proxy - Server Protection or anyone looking for a quick-start guide of how to work with SSL Proxy - Server Protection.
Stopping C&C Communication with Sky ATP
Learn how to configure the anti C&C functionality with Sky ATP. This training is most appropriate for users who are new to working with Sky ATP or anyone looking for a quick-start guide of how to configure the anti C&C functionality with Sky ATP.
Stopping Malware with Sky ATP
Learn how to configure the advanced anti-malware functionality with Sky ATP. This training is most appropriate for users who are new to working with Sky ATP or anyone looking for a quick-start guide of how to configure the advanced anti-malware functionality with Sky ATP.
Troubleshooting Feed Downloads with Adaptive Threat Profiling
Learn how to troubleshoot Adaptive Threat Profiling issues that are related to downloading feeds. This training is most appropriate for users who are familiar with SRX Series devices.
Troubleshooting Feed Uploads with Adaptive Threat Profiling
Learn how to troubleshoot Adaptive Threat Profiling issues that are related to uploading feeds. This training is most appropriate for users who are familiar with SRX Series devices.
Troubleshooting Log Collector Issues
Learn how to troubleshoot a variety of issues that might cause Log Collector to not function correctly. This training is most appropriate for administrators and network designers who are responsible for managing Junos Space Network Management Platform and Junos Space Security Director.
Using IPS Templates with J-Web
Learn how to use IPS templates on SRX devices using J-Web. This training is most appropriate for users who are new to working with IPS templates on SRX devices or anyone looking for a quick-start guide of how to use IPS templates with J-Web on SRX devices.
Using the Juniper/PyEZ Container and the jnpr.junos.facts Library
Learn how to use the the Juniper/PyEZ Docker container to execute PyEZ scripts and how to use the Device.facts function to retrieve specific device properties. This training is for those wanting to learn how to automate Junos with PyEZ.
Using the proNX Manager with Integrated DWDM Interfaces on MX and PTX Platforms
Learn how to use the automated discovery function in the proNX Service manager to discover network elements from Juniper’s Junos based product families. It also shows how to use the proNX viewing options to display DWDM network interfaces and ports on Juniper routers, monitor interface and port operational states, display Performance Measurements (PMs) and change configuration settings. We also walk through the process of Service Activation on the proNX Service Manager and launch Optical services and transport services from an integrated DWDM port on a Junos-based router.
UTM Antivirus
This video provides an overview of UTM Antivirus on Juniper devices.
UTM Web Filtering with Security Director
Learn how to work with UTM Web filtering on SRX Series devices using Junos Space Security Director. This training is most appropriate for users who are new to working with UTM Web filtering on SRX Series devices with Security Director or anyone looking for a quick-start guide of how to work with UTM Web filtering with Security Director on SRX Series devices.
Virtual Channels for IPsec Tunneling
This video reviews the deployment of virtual channels on a shared interface with IPsec encryption.
Virtual Chassis Aliases on EX Series Switches
This video demonstrates the process of configuring and verifying aliases for Virtual Chassis members on EX Series Switches. This training is most appropriate for administrators who need to more easily identify Virtual Chassis members.
6PE Learning Byte
This video covers 6PE which allows Service Providers to provide new revenue-generating services to their customers by offering native IPV6 connectivity without the need to upgrade the provider (P) core routers and with no impact on existing IPv4 and MPLS services.
6VPE Adds IPv6 Support to the Existing MPLS VPN
6VPE adds IPv6 support to the existing MPLS VPN offerings without any upgrade/change to your IPV4 MPLS core, 6VPE is very similar to IPv4 L3 VPN and allows you to offer IPv6 native or dual stack VPNs. This training is appropriate for intermediate users with a background in the basics of IPv6, MPLS, IPV4 L3VPN and MPBGP in the Junos OS, or anyone looking to learn about 6VPE.
Active Directory/Windows NT Authentication Server Configuration
Learn how to configure an Active Directory/Windows NT authentication server on the Junos Pulse Secure Access Service or Junos Pulse Access Control Service. You will also learn basic troubleshooting when the AD/NT server fails to connect to the Windows Server.
Adding a Control Node in Contrail
Learn how to add a new control node within Contrail. This training is most appropriate for users who are new to working with Contrail or anyone looking for a quick-start guide of how to add a control node within Contrail.
Adding a Mux Demux to a ROADM Degree on the proNX Optical Director
This video reviews the process of adding a passive 96 Channel fixed channelized Mux/Demux to a ROADM node controlled by the proNX Optical Director.
Adding a vRouter in Contrail
Learn how to add a new vRouter within Contrail. This training is most appropriate for users who are new to working with Contrail or anyone looking for a quick-start guide of how to add a vRouter within Contrail.
Advanced AppQoS
This video covers how to configure and use AppQoS with CoS on SRX Series devices. This training is most appropriate for users who are familiar with working with AppQoS and CoS or anyone looking for a quick-start guide of how to configure and use AppQoS with CoS on SRX Series devices.
Anycast-RP
This video covers the theory and configuration of Anycast-RP as well as an example of configuring Anycast-RP and PIM Anycast. This training is most appropriate for users who need a basic understanding of Anycast-RP and PIM-Anycast and how to configure and test it.
AS-Path Regular Expressions
This video demonstrates configuration examples of AS-Path regular expressions, which are pattern matching variables that can be referenced in a routing policy.
Asymmetric Traffic with a Flow Based Device
Learn how to handle asymmetric traffic with SRX Series devices. This training is most appropriate for users who need a basic understand of asymmetric traffic flows or anyone looking for a quick-start guide of how to asymmetric traffic flows with SRX Series devices. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.
Asymmetric Traffic with a Flow-Based Device
This video covers how to handle asymmetric traffic with SRX Series devices. This training is most appropriate for users who need a basic understand of asymmetric traffic flows or anyone looking for a quick-start guide of how to asymmetric traffic flows with SRX Series devices. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.
Automate Network Change Verification Using JSNAP
The Junos Snapshot Administrator (JSNAP) can be used to automate network change verification on a Junos device. This video will walk through some of the basics of JSNAP and explain how it can save a lot of time verifying network changes.
Automate Network Change Verification Using JSNAP
The Junos Snapshot Administrator (JSNAP) can be used to automate network change verification on a Junos device. This video walks you through some of the basics of JSNAP and explain how it can save a lot of time verifying network changes.
Automating VLAN Provisioning on Multiple Junos Devices Using Puppet for Junos
This video covers deploying same tagged and un-tagged VLANS on multiple Junos devices using a single Puppet manifest file to unleash the power of automation on the Junos platform.
Basic AppQoS
This video covers how to configure and use AppQoS with SRX Series devices. This training is most appropriate for users who are new to working with AppQoS or anyone looking for a quick-start guide of how to configure and use AppQoS with SRX Series devices.
Basic OSPFv2 Configuration
This video explains the initial steps to enable OSPFv2 on devices running the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to learn about enabling OSPFv2 on Junos-based devices.
Basic Segment Routing Configuration with ISIS
This video covers how to configure and monitor segment routing using ISIS. This training is most appropriate for users who are new to working with segment routing.
Basic Segment Routing Configuration with OSPF
This video covers how to configure and monitor segment routing using OSPF. This training is most appropriate for users who are new to working with segment routing.
Basic Session Logging
This video covers how to configure an SRX Series device to log basic session information This training is most appropriate for users who are new to working with SRX Series devices or anyone looking for a quick-start guide of how to configure basic session logging on an SRX device. For more on this subject, attend the Advanced Junos Security (AJSEC) course.
Basic VPLS LDP Configuration
Learn how to configure and verify VPLS using LDP in MX Series devices. This training has a short lecture followed by a demonstration and is appropriate for new users to learn about enabling and verifying VPLS on Junos-based devices. If you want to learn more about this topic, check out the Junos MPLS and VPNs (JMV) course.
BGP Authentication
This video explains how BGP authentication works and demonstrates how it is enabled in the configuration of a Junos device This training is most appropriate for administrators and network designers who are responsible for managing Junos platforms. If you're interested in more, check out the Junos Intermediate Routing (JIR) course.
BGP Route Flap Damping
This video discusses the parameters used in route damping, configuration, and use in cases where EBGP links become unstable. This applies to all platforms and software versions.
BGP Routing: J-Web
This video covers how to configure BGP routing using J-Web. This training is most appropriate for users who are new to working with BGP routing or anyone looking for a quick-start guide of how to configure BGP routing using J-Web.
BGP Well-Known Communities
This video covers how to use BGP well-known communities in the Junos OS. This training is most appropriate for users who are familiar with using routing policies and communities to apply or change BGP route attributes in the Junos OS.
Brute Force Login Attack Prevention
This video explains how to configure a SRX firewall to prevent brute force login attacks. This training is most appropriate for administrators and network designers who are responsible for managing Junos platforms. If you want to learn more about security on SRX Series devices, check out the Junos Security (JSEC) course.
Building and Deploying VLAN Profiles in Network Director
Learn how to build and deploy VLAN profiles in the Junos Space Network Director application. This training is most appropriate for users who are new to working with Network Director or anyone looking for a quick-start guide of how to work with Network Director profiles.
Change Your Junos Working Directory
This video demonstrates using the set cli directory command to change an administrators working directory on a Junos platform.
Chassis Cluster Interface Monitoring
This video covers how to configure interface monitoring within the chassis cluster configuration in the Junos OS. This video also covers the process of verification that the configuration is actually working. This training is most appropriate for users who are familiar with configuring a chassis cluster in Junos OS.
Chassis Cluster IP Monitoring
This video covers how to configure an SRX Series device to failover to the secondary node in the case of an unreachable IP address. This training is most appropriate for users who are familiar with configuring an SRX Series devices in a chassis cluster.
Class of Service Basics, Part 3: Policing
This video provides an introduction to the major components of CoS implementation on Junos devices. This video is the third in the series, digging into more detail on the policing component of Junos CoS. This training is most appropriate for users who want an overview of implementing CoS on Junos devices.
Clustering
This video is appropriate for SRX users to assist them in understanding and implementing redundant SRXs in a cluster configuration. There is a short lecture followed by a demonstration on how to configure high availability cluster parameters.
Conditional Route Advertising with SRX Series Chassis Clusters
Conditional route advertising allows administrators of SRX Series chassis clusters to provide optimal traffic flows while still providing full redundancy. This feature uses routing policy to advertise routes only when the active next-hop is attached to the primary SRX Series node in a redundancy group. This training is appropriate for all administrators and operators of SRX Series devices.
Configuration Archival
Configuration archival allows you to have the most recent configuration file automatically backed up to a remote device. The archival can be done when issuing a commit or at specific time intervals. This training demonstrates the configuration archival syntax and demonstrates how to check the success or failure of the file transfer.
Configuring AppFormix Composite Alarms
This video covers how to configure AppFormix composite alarms. This training is most appropriate for users who are new to working with AppFormix composite alarms or anyone looking for a quick-start guide of how to configure AppFormix composite alarms.
Configuring AppFormix Static Alarm Rules
This video covers how to configure AppFormix static alarm rules. This training is most appropriate for users who are new to working with AppFormix static alarm rules or anyone looking for a quick-start guide of how to configure AppFormix static alarm rules.
Configuring BFD for Static Routes Using the CLI
This video covers how to configure and verify BFD for static routes on Junos devices using the CLI. This training is most appropriate for users who are new to working with BFD for static routes on Junos devices or anyone looking for a quick-start guide of how to work with BFD for static routes on Junos devices.
Configuring Chassis Cluster Interfaces with J-Web
This video covers how to configure chassis cluster interfaces using J-Web. This training is most appropriate for users who are new to working with chassis clustering on SRX Series devices or anyone looking for a quick-start guide of how to work with chassis clusters interfaces using J-Web on SRX devices.
Configuring Chassis Cluster Interfaces with J-Web
This video covers how to configure AppFormix dynamic alarm rules. This training is most appropriate for users who are new to working with AppFormix dynamic alarm rules or anyone looking for a quick-start guide of how to configure AppFormix dynamic alarm rules.
Configuring Chassis Cluster IP and Interface Monitoring with J-Web
This video covers how to configure chassis cluster IP and interface monitoring using J-Web. This training is most appropriate for users who are new to working with chassis clustering on SRX series devices or anyone looking for a quick-start guide of how to work with chassis clusters IP and interface monitoring using J-Web on SRX devices.
Configuring CLI Configlets on Junos Space
This video covers the process of creating a simple CLI Configlet on Junos Space. This training is intended for someone familiar with Junos and Junos Space and who would like to learn how to use configlets to easily customize the configurations on devices managed by Junos Space. If you want to learn more about Junos Space and the tools it provides, check out the Junos Space Essentials (JSE) course.
Configuring Control Plane DDoS Protection
This video covers how to configure and verify control plane DDoS protection. This training is most appropriate for users who are new to working with control plane DDoS protection.
Configuring DNS and Static Hostnames on Junos Devices
This video explains hostname and domain name configuration, as well as name resolution options for devices running the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to learn about device naming and name resolution on Junos-based devices.
Configuring gRPC JTI with AppFormix
This video covers how to configure gRPC JTI with AppFormix. This training is most appropriate for users who are new to working with gRPC JTI or anyone looking for a quick-start guide of how to configure gRPC JTI with AppFormix.
Configuring High Availability on Juniper Virtual Chassis
High Availability features like GRES, Nonstop Routing or Nonstop Bridging can significantly reduce the RE failure detection time and helps to eliminate network outages. This training is appropriate for users with a background in the basics of routing and familiar with the concepts of Virtual Chassis, or anyone looking to learn about High Availability features present in Juniper Virtual Chassis.
Configuring IRB Interfaces on an MX Router
This video shows a basic example of configuring Integrated Routing and Bridging (IRBs) interfaces on an MX series router. This training is most appropriate for new or intermediate users of the Junos OS and anyone looking to better understand IRB interfaces.
Configuring IRB Interfaces on an MX Router
This video shows a basic example of configuring Integrated Routing and Bridging (IRBs) interfaces on an MX series router. This training is most appropriate for new or intermediate users of the Junos OS and anyone looking to better understand IRB interfaces.
Configuring Layer 3 Routed VLAN Interfaces on an EX Series Switch
This video shows a basic example of configuring that service on an EX Series Switch. This training is most appropriate for new or intermediate users of the Junos OS or anyone looking to become more efficient using the Junos OS CLI.
Configuring Layer-3 Routed VLAN Interfaces on an EX Series Switch
This video shows a basic example of configuring that service on an EX Series Switch. This training is most appropriate for new or intermediate users of the Junos OS or anyone looking to become more efficient using the Junos OS CLI.
Configuring Load Balancing Using the CLI
This video covers how to configure and verify load balancing on Junos devices using the CLI. This training is most appropriate for users who are new to working with load balancing on Junos devices or anyone looking for a quick-start guide of how to work with load balancing on Junos devices.
Configuring Load Balancing Using the J-Web
This video covers how to configure and verify load balancing on Junos devices using J-Web. This training is most appropriate for users who are new to working with load balancing on Junos devices or anyone looking for a quick-start guide of how to work with load balancing on Junos devices.
Configuring Multiple Junos Devices Using Junos PyEZ and Templates
This video covers configuration deployment of multiple Junos devices using Junos PyEZ framework and configuration templates. This training is most appropriate for users or administrator of Junos devices who also have some knowledge about Python and automation.
Configuring Native JTI with AppFormix
This video covers how to configure native JTI with AppFormix. This training is most appropriate for users who are new to working with native JTI or anyone looking for a quick-start guide of how to configure native JTI with AppFormix.
Configuring Route-Based Site-to-Site IPSec VPN on the SRX
This video discusses the configuration of a secure VPN tunnel between two Juniper Networks SRX-series devices. The concept of route-based VPN is briefly discussed and the commands needed to configure and monitor the VPN are shown. This training is appropriate for beginner to intermediate level engineers who want to start configuring IPsec VPNs on their SRX devices.
Configuring Security Zones with J-Web
This video covers how to configure security zones on SRX Series devices using J-Web. This training is most appropriate for users who are new to working with security zones on SRX devices or anyone looking for a quick-start guide of how to work with security zones with J-Web on SRX devices.
Configuring SRX Security Logs in the CLI
This video covers how to configure security logs on SRX Series devices using the CLI. This training is most appropriate for users who are new to working with security logs or anyone looking for a quick-start guide of how to configure security logs on SRX devices using the CLI.
Configuring SRX Security Logs in the J-Web
This video covers how to configure security logs on SRX Series devices using the J-Web interface. This training is most appropriate for users who are new to working with security logs or anyone looking for a quick-start guide of how to configure security logs on SRX devices using the J-Web interface.
Configuring the PSM Client to Use Software Utilities in Non-Default Folders
This video covers various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
Configuring the SRX as a DHCP Server: J-Web
This video covers configuring the SRX Series as a DHCP server using J-Web. This training is most appropriate for users who are new to working with the DHCP server features of the SRX Series devices.
Configuring the SRX Series as a DHCP Server
This video covers how to configure and use the SRX device as a DHCP server. This training is most appropriate for users who are new to working with SRX Series devices or anyone looking for a quick-start guide of how to configure an SRX device as a DHCP server.
Configuring Transparent Mode on an SRX Series
This video covers how to configure transparent mode on an SRX Series device. This video also covers the process of verification that the configuration is actually working. This training is most appropriate for users who are familiar with configuring security zones and security policies in Junos OS.
Configuring UTM Antivirus with J-Web
This video covers how to configure UTM anti-virus on SRX Series devices using J-Web. This training is most appropriate for users who are new to working with UTM anti-virus on SRX devices or anyone looking for a quick-start guide of how to work with UTM anti-virus with J-Web on SRX devices.
Contrail Enterprise Multicloud: BMS Multihoming to Different Networks
This video covers how to use Command user interface to attach a multihomed BMS to multiple overlay networks. This training is most appropriate for users who are new to working with Contrail Enterprise Multicloud or anyone looking for a quick-start guide of how to work with Contrail Enterprise Multicloud and BMSs.
Contrail Enterprise Multicloud: BMS Multihoming Using a Bonded Interface
This video covers how to use Command user interface to attach a multihomed BMS to an IP fabric. This training is most appropriate for users who are new to working with Contrail Enterprise Multicloud or anyone looking for a quick-start guide of how to work with Contrail Enterprise Multicloud and BMSs.
Contrail Enterprise Multicloud: Brownfield Underlay
This video covers how to use Command user interface to onboard a Brownfield (existing) IP fabric. This training is most appropriate for users who are new to working with Contrail Enterprise Multicloud or anyone looking for a quick-start guide of how to work with Contrail Enterprise Multicloud and IP fabrics.
Contrail Enterprise Multicloud: Centralized Routing
This video covers how to use Command user interface to enable an IP fabric to centrally route (through the Spine) between overlay networks. This training is most appropriate for users who are new to working with Contrail Enterprise Multicloud or anyone looking for a quick-start guide of how to work with Contrail Enterprise Multicloud and IP fabrics.
Contrail Enterprise Multicloud: CSN Overview
This video provides an overview of the purpose of the Contrail Services Node (CSN). This training is most appropriate for users who are new to working with Contrail Enterprise Multicloud or anyone looking for a quick-start guide of how to work with Contrail Enterprise Multicloud and IP fabrics.
Contrail Enterprise Multicloud: Greenfield Underlay
This video covers how to use Command user interface to onboard a Greenfield (factory default) IP fabric. This training is most appropriate for users who are new to working with Contrail Enterprise Multicloud or anyone looking for a quick-start guide of how to work with Contrail Enterprise Multicloud and IP fabrics.
Contrail Enterprise Multicloud: QFX10000 as DC Gateway
This video covers how to use the Contrail Command user interface to enable the DC-Gateway function on a QFX10k device. This training is most appropriate for users who are new to working with Contrail Enterprise Multicloud or anyone looking for a quick-start guide of how to work with Contrail Enterprise Multicloud and IP fabrics.
Contrail Enterprise Multicloud: VM to BMS Bridging
This video covers how to use the Contrail Command user interface to enable bridging between virtual machines and BMSs. This training is most appropriate for users who are new to working with Contrail Enterprise Multicloud or anyone looking for a quick-start guide of how to work with Contrail Enterprise Multicloud and IP fabrics.
Creating a Junos Sandbox with vSRX and VirtualBox
This video covers the deployment of Junos vSRX VM into VirtualBox. This training is most appropriate for users or administrators of Junos vSRX VMs or for users new to Junos that want a way to create a Junos sandbox.
Creating a Wavelength Transport Service on the proNX Optical Director
This video covers how to configure and verify a point-to-point transport service for a specific wavelength (optical channel) on a Programmable Photonic layer Open Line System network that is controlled by the proNX Optical Director. This training is most appropriate for users who are new to working with Programmable Photonic Layer Open Line System networks or anyone looking for a quick-start guide of how to work with the proNX Optical Director.
Creating an Ethernet Service on Your Network Using the PSM
This video covers various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
Creating an Ethernet Virtual Private Service Using the PSM
This video cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
Creating Intra Site and Inter Site Topology on the proNX Optical Director
This video covers how to configure and verify topology of a Programmable Photonic layer Open Line System network on the proNX Optical Director. This training is most appropriate for users who are new to working with Programmable Photonic Layer Open Line System networks or anyone looking for a quick-start guide of how to work with the proNX Optical Director.
Creating Sites and Discovering Network Elements on the proNX Optical Director
This video covers how to configure new site definitions and perform the discovery process of the network elements on the proNX Optical Director. This training is most appropriate for users who are new to working with Programmable Photonic Layer Open Line System networks or anyone looking for a quick-start guide of how to work with the proNX Optical Director.
CTP Password Recovery
This video provides the steps required to recover from an unknown root password. This training is appropriate for all users of the Juniper CTP solution.
Customizing and Using the Dashboard and Drilling Down to Alarms on the proNX Optical Director
This video explains how a pOD user can customize his account’s Dashboard screen to display the information he is interested in, and demonstrates the process of alarm “drill down” from the dashboard widgets.
DDoS Mitigation using BGP Flow Spec (Korean language)
This video introduces the BGP flow spec which is described in RFC 5575 as a way to propagate flow specific rules effectively to mitigate a DDoS attack and suggests the effective model of DDoS monitoring systems with BGP flow spec. BGP 플로우 스팩을 사용한 DDoS 경감 러닝바이트는 DDoS 공격을 효과적으로 경감시키기위해 플로우 스팩 정책들을 전파하기 위한 방법으로 RFC 5575에 정의된 BGP 플로우 스팩을 소개합니다. 또한 BGP 플로우 스팩을 사용한 효과적인 DDoS 모니터링 시스템을 제시합니다.
Deploying an Application with Docker
This video introduces basic Docker image management and Dockerfile creation. This training is useful for those new to working with Docker.
Deploying Automated Support and Prevention (ASAP) - Part 1
This video will guide you through installing, configuring, troubleshooting, and thoroughly understanding Juniper Networks ASAP solution including the Service Now and Service Insight applications. ASAP is Juniper’s solution for the fastest and most thorough method to detect, prevent, and resolve hardware and software faults on Junos platforms. ASAP includes the applications Service Now and Service Insight which operate on the Junos Space Network Management Platform. Service Now works in conjunction with Advanced Insight Scripts (AI-Scripts) to automate troubleshooting data collection and end-to-end, zero-touch support case creation. Service Insight provides reporting for end of life (EoL) and proactive bug notifications (PBNs). Troubleshooting data (Juniper Message Bundles, JMBs) collected by AI-Scripts are packaged to integrate seamlessly with ASAP’s automated data analysis system, Juniper Case Attachment Tool Suite (JCATS). JCATS will scan JMBs, detect known issues, and report findings to JTAC engineers to assist in expediting case resolution.
Deploying Automated Support and Prevention (ASAP) - Part 2
This video will guide you through installing, configuring, troubleshooting, and thoroughly understanding Juniper Networks ASAP solution including the Service Now and Service Insight applications. ASAP is Juniper’s solution for the fastest and most thorough method to detect, prevent, and resolve hardware and software faults on Junos platforms. ASAP includes the applications Service Now and Service Insight which operate on the Junos Space Network Management Platform. Service Now works in conjunction with Advanced Insight Scripts (AI-Scripts) to automate troubleshooting data collection and end-to-end, zero-touch support case creation. Service Insight provides reporting for end of life (EoL) and proactive bug notifications (PBNs). Troubleshooting data (Juniper Message Bundles, JMBs) collected by AI-Scripts are packaged to integrate seamlessly with ASAP’s automated data analysis system, Juniper Case Attachment Tool Suite (JCATS). JCATS will scan JMBs, detect known issues, and report findings to JTAC engineers to assist in expediting case resolution.
Deploying Automated Support and Prevention (ASAP) - Part 3
This video will guide you through installing, configuring, troubleshooting, and thoroughly understanding Juniper Networks ASAP solution including the Service Now and Service Insight applications. ASAP is Juniper’s solution for the fastest and most thorough method to detect, prevent, and resolve hardware and software faults on Junos platforms. ASAP includes the applications Service Now and Service Insight which operate on the Junos Space Network Management Platform. Service Now works in conjunction with Advanced Insight Scripts (AI-Scripts) to automate troubleshooting data collection and end-to-end, zero-touch support case creation. Service Insight provides reporting for end of life (EoL) and proactive bug notifications (PBNs). Troubleshooting data (Juniper Message Bundles, JMBs) collected by AI-Scripts are packaged to integrate seamlessly with ASAP’s automated data analysis system, Juniper Case Attachment Tool Suite (JCATS). JCATS will scan JMBs, detect known issues, and report findings to JTAC engineers to assist in expediting case resolution.
Deploying Automated Support and Prevention (ASAP) - Part 4
This video will guide you through installing, configuring, troubleshooting, and thoroughly understanding Juniper Networks ASAP solution including the Service Now and Service Insight applications. ASAP is Juniper’s solution for the fastest and most thorough method to detect, prevent, and resolve hardware and software faults on Junos platforms. ASAP includes the applications Service Now and Service Insight which operate on the Junos Space Network Management Platform. Service Now works in conjunction with Advanced Insight Scripts (AI-Scripts) to automate troubleshooting data collection and end-to-end, zero-touch support case creation. Service Insight provides reporting for end of life (EoL) and proactive bug notifications (PBNs). Troubleshooting data (Juniper Message Bundles, JMBs) collected by AI-Scripts are packaged to integrate seamlessly with ASAP’s automated data analysis system, Juniper Case Attachment Tool Suite (JCATS). JCATS will scan JMBs, detect known issues, and report findings to JTAC engineers to assist in expediting case resolution.
Deploying Firefly Perimeter VM into Vmware ESXi5.5 Server
This video covers the deployment of Junos Firefly Perimeter VM into Vmware ESXi5.5 Server. This training is most appropriate for users or administrators of Junos Firefly perimeter VMs.
Deploying MVRP
This video provides implementation details on deploying MVRP in a Layer 2 network. This training is appropriate for users implementing hierarchical Layer 2 networks using EX and QFX Series switches.
Deploying Virtual Router Reflector on CentOS KVM
This video covers how to deploy Virtual Router Reflector (VRR) on CentOS KVM hypervisor. This training is appropriate for network administrators who are trying to deploy vRR inside a CentOS based KVM environment.
Deploying Virtual Router Reflector on VMware ESXi
This video covers how to deploy Virtual Router Reflector (VRR) on VMWare ESXi 6.0. This training is appropriate for network administrators who are trying to deploy vRR inside ESXi environment.
Device Management: J-Web
This video covers device management of Junos devices using J-Web. This training is most appropriate for users who are new to working with device management features J-Web.
DiffServ-Aware TE: MAM
This video covers how to configure MAM for DiffServ-aware TE. This training is most appropriate for users who are new to working with DiffServ-aware TE or anyone looking for a quick-start guide of how to configure MAM for DiffServ-aware TE LSPs.
Docker Compose
This video introduces the Docker Compose tool. This training is most appropriate for network engineers new to Docker.
Docker Networking
This video introduces basic Docker networking concepts and commands. This training is appropriate for those new to Docker.
Dynamic VPN: CLI
This video covers how to configure dynamic VPNs, using the Pulse client, in the Junos OS CLI. This training is most appropriate for users who are new to working with dynamic VPNs.
Enrolling Devices with Sky ATP
This video walks users through the process of enrolling SRX Series Devices. It navigates through the various web portal screens used for creating the enrollment op script. It then switches to the SRX Series device CLI to display how the op command is run there.
Executing a Link Trace on Ethernet Service Using PSM
This video cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
File Checksum
This video demonstrates using the file checksum command to verify the integrity of a Junos software installation file.
Filter-Based Forwarding with a Flow Based Device
Learn how to configure and use filter-based forwarding with SRX Series devices. This training is most appropriate for users who are new to working with filter-based forwarding or anyone looking for a quick-start guide of how to configure and use filter-based forwarding with SRX Series devices.
Filter-Based Forwarding with a Flow-Based Device
This video covers how to configure and use filter-based forwarding with SRX Series devices. This training is most appropriate for users who are new to working with filter-based forwarding or anyone looking for a quick-start guide of how to configure and use filter-based forwarding with SRX Series devices.
Firewall Filter Basics
This video explains the format, syntax and basic functionality of firewall filters on devices running the Junos OS.
Forwarding Mode SRX: J-Web
This video covers how to configure the forwarding mode for SRX Series devices in J-Web. This training is most appropriate for users who are new to working with the forwarding mode for SRX or anyone looking for a quick-start guide of how to configure the forwarding mode for SRX using J-Web.
High Availability Switching with SRX Series Devices
This video covers how to configure and use Layer 2 Ethernet switching with SRX Series chassis clusters. This training is most appropriate for users who are new to working with SRX Series chassis clusters or anyone looking for a quick-start guide of how to configure and use Layer 2 Ethernet switching with SRX Series chassis clusters.
How to Downgrade a WLC Series Controller
Learn how to verify your current version of the Mobility System Software (MSS) and active boot partition. Then set the WLC back to the previous version of the MSS. This training is appropriate for all users of Juniper Wireless LAN solution.
How To View The Rescue Configuration
This video describes using operational mode cli commands to create and display a JUNOS device rescue configuration file. This training is most appropriate for administrators who are responsible for managing Junos device configuration.
How to View Which Routes are Contributing to an Aggregate Route
This video covers how a user can use the “Show Route Exact” command to view which active routes are contributing to a specific Aggregate Route. This training is most appropriate for users who are new to working with Junos or anyone looking for a quick-start guide of how to use aggregate routes.
Implementing Advanced Policy-Based Routing with Security Director
This video covers how to work with Advanced Policy Based Routing on SRX devices using Junos Space Security Director. This training is most appropriate for users who are new to working with Advanced Policy Based Routing and Security Director or anyone looking for a quick-start guide of how to work with Advanced Policy Based Routing with Security Director on SRX devices.
Implementing BGP over IPsec
This video covers how to configure and troubleshoot BGP over IPsec on SRX Series devices. This training is most appropriate for users who are looking to understand how to implement BGP over IPsec with SRX Series devices. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.
Implementing Dynamic VPNs
This video covers how to configure and troubleshoot dynamic VPNs on SRX Series devices. This training is most appropriate for users who are looking to understand how to implement dynamic VPNs on SRX Series devices. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.
Implementing OSPF over GRE over IPsec
This video covers how to configure OSPF over GRE over IPsec on SRX Series devices. This training is most appropriate for users who are looking to understand how to implement OSPF over GRE over IPsec on SRX Series devices. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.
Implementing OSPF over IPsec
This video covers how to configure and troubleshoot OSPF over IPsec on SRX Series devices. This training is most appropriate for users who are looking to understand how to implement OSPF over IPsec with SRX Series devices. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.
Initializing a Multi-Node Junos Space Fabric
Learn how to properly setup a multi-node Junos Space Fabric. This training is most appropriate for users who are just beginning to work with Junos Space Fabric, or anyone looking for a quick-start guide for basic Junos Space configuration.
Installing vMX with a KVM Hypervisor
This video illustrates how to use KVM to instantiate a vMX device.
Integrated User Firewall Using J-Web
This video covers how to configure integrated user firewall using J-Web. This training is most appropriate for users who are new to working with integrated user firewall or anyone looking for a quick-start guide of how to configure integrated user firewall using J-Web.
Interface Naming Conventions
This video explains the format used to identify interfaces on devices running the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for those new to Junos-based devices.
Interface Uplink Failure Detection
This video discusses enabling the interface uplink failure detection feature on a Junos OS-based platform.
Intermediate MPLS Basic RSVP-Signaled LSPs
This video covers basic configuration for RSVP-signaled label-switched paths (LSPs) in the Junos OS. This training is most appropriate for users who are just beginning to configure and use RSVP in the Junos OS, or anyone looking for a quick-start guide for basic RSVP configuration in the Junos OS. To get the most from this training, users should be familiar with the material covered in the MPLS Basics video.
Intermediate MPLS: Basic RSVP-Signaled LSPs
This video covers basic configuration for RSVP-signaled label-switched paths (LSPs) in the Junos OS. This training is most appropriate for users who are just beginning to configure and use RSVP in the Junos OS, or anyone looking for a quick-start guide for basic RSVP configuration in the Junos OS.
Intermediate MPLS: Static RSVP Paths
This video covers configuring static paths for RSVP-signaled label-switched paths (LSPs) in the Junos OS. This training is most appropriate for users who are just beginning to configure and use RSVP in the Junos OS, or anyone looking for a quick-start guide for basic RSVP path configuration in the Junos OS. To get the most from this training, users should be familiar with the material covered in the MPLS Basics video and the Intermediate MPLS: Basic RSVP-Signaled LSPs video.
Intermediate OSPF: Using IPv4 with OSPFv3
This video covers the use of IPv4 and IPv6 using only OSPFv3; in addition to migration of IPv4 from OSPFv2 to OSPFv3. This training is most appropriate for users who are interested in taking advantage of the enhancements provided by OSPFv3 and are also interested in running a common IGP for both IPv4 and IPv6 routes.
Introducing Docker
This video introduces basic containerization concepts and the Docker container runtime. This training is most useful for those new to Docker.
Introduction to Enhanced Layer 2 Software
This video gives an overview of Enhanced Layer 2 Software using the Junos OS. After the overview, a demonstration is given using the ELS Translation tool. The tool is used to translate older style Junos Layer 2 CLI into newer Junos ELS CLI. The demonstration provides an example of a mocked migration from EX4200 switches to EX4300 switches.
Introduction to Fibre Channel and FCoE on the QFX3500 Switch
This video provides a brief introduction to Fibre Channel (FC) and Fibre Chanel over Ethernet (FCoE). We then, describe the FC interfaces on the QFX3500 Switch. A demonstration is provided for configuring an FC interface on the QFX3500 Switch using the Junos CLI. This training is most appropriate for intermediate users who are unfamiliar with FC, FCoE, or configuration of an FC interface on the QFX3500 Switch.
Introduction to Kubernetes
This video provides an overview of Kubernetes and is most appropriate for those new to Kubernetes or network automation.
Introduction to Segment Routing
This video provides an overview of segment routing.
IPv6 Basics
This video describes the IPv6 addressing scheme and compares IPv6 to IPv4. A demonstration is provided to illustrate how an IPv6 address can be easily added to an interface using the Junos CLI. This training is most appropriate for intermediate users who are unfamiliar with the IPv6 addressing scheme.
IPv6 BGP Routes Over IPv4 BGP
This video covers how to learn IPv6 BGP routes over an IPv4 BGP peering in the Junos OS. This video also covers the process of troubleshooting and the configuration needed to resolve learning IPv6 BGP routes over IPv4 BGP. This training is most appropriate for users who are familiar with using BGP, IPv6 and routing policies in the Junos OS.
IS IS Configuration
This video covers basic configuration of the Intermediate System to Intermediate System configuration on all Junos routing platforms. This video also covers commands to verify that the configuration is working properly. This training is most appropriate for users that have attended the Introduction to the Junos OS and Junos Intermediate Routing courses or have equivalent experience.
IS-IS Configuration
This video covers basic configuration of the Intermediate System to Intermediate System configuration on all Junos routing platforms. This video also covers commands to verify that the configuration is working properly. This training is most appropriate for users that have attended the Introduction to the Junos OS and Junos Intermediate Routing courses or have equivalent experience.
J-Web
This video covers basic configuration and administration of the J-Web feature in the Junos OS. This training is most appropriate for users who desire to administer JUNOS devices using a web interface.
J-Web Aggressive Mode VPN Configuration Overview
This video discusses using the J-Web interface to configure an aggressive mode site to site VPN.
J-Web Mode VPN Configuration Overview
This video discusses using the J-Web interface to configure a main mode site to site VPN.
Juniper Networks vGW Virtual Gateway: Introduction & Installation
This video provides a quick introduction to the vGW Virtual Gateway security solution and then performs a default installation in a VMware environment. This training is appropriate for all users of the vGW Virtual Gateway product.
Juniper Sky Enterprise Add Device
This video discusses adding SRX Series devices to the Juniper Sky Enterprise application.
Juniper Sky Enterprise Bulk Configuration Updates
This video discusses using the Juniper Sky Enterprise application to centrally deploy configuration updates to multiple SRX Series devices.
Juniper Sky Enterprise Security Policy Templates
This video discusses using the Juniper Sky Enterprise application to centrally deploy security policies to multiple SRX Series devices.
Juniper Technical Assistance Center (JTAC) Recommended Junos Software Versions
This video demonstrates how to identify the recommended version of Junos software to upgrade or install on a Junos platform. It also demonstrates use of the operational mode show version command to determine the hardware platform and currently running version of Junos software on a networking device. This training is most appropriate for administrators who are responsible for managing Junos platforms.
Juniper Wireless LAN CLI Basics
This video explains the three modes of the Wireless LAN Controller used for setup, management, and configuration. It also demonstrates the Login procedure and some of the basic commands used in the Configuration Mode known as the Enable mode. This training is appropriate for beginning and intermediate users of the Juniper Wireless LAN system or anyone looking to learn more about Wireless Controller CLI.
Juniper Wireless LAN Configuring a VLAN
This video shows you the different methods (RingMaster and CLI) you can use to create a VLAN and ways to verify and test the configuration. This training is appropriate for all users of the Juniper Wireless LAN system or anyone looking to learn more about how to create a VLAN on the Juniper Wireless Solution.
Junos Administrator Permissions (Spanish Language)
Este video explica el concepto de login classes en Junos OS. Es apropriado para administradores que desean controlar derechos y permisos en el Junos OS.
Junos Automation Using Windows PowerShell
This video demonstrates automating Junos device commands using windows PowerShell and Posh-Junos module. This training will enable Windows System/network administrators who are already familiar with Windows PowerShell syntax and like to automate Junos devices using PowerShell.
Junos Basics: Connecting to a Junos Device
This video shows you the appropriate connection and terminal requirements for connecting to a Factory Defaulted Junos device. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos.
Junos Basics: Factory Defaulting a Junos Device
This video shows you the different methods to set a Junos device back to factory default. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos.
Junos Basics: Logging in as Root
This video shows you how to log in as root on a factory defaulted Junos device. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos.
Junos CLI Advanced Techniques: Load Patch and Replace Pattern
This video provides an overview of two very powerful commands - 'load patch' and 'replace pattern' The techniques revealed in this video are extremely useful for those wishing to accomplish more in a shorter period of time, especially when copying configurations amongst a large number of devices, or requiring configuration changes across many different stanzas. This training is most appropriate for those wanting to learning advanced CLI procedures, or for those studying for the JNCIE lab exams.
Junos CLI Advanced Techniques: Load Patch and Replace Pattern
This video provides an overview of two very powerful commands - 'load patch' and 'replace pattern' The techniques revealed in this training are extremely useful for those wishing to accomplish more in a shorter period of time, especially when copying configurations amongst a large number of devices, or requiring configuration changes across many different stanzas. This training is most appropriate for those wanting to learning advanced CLI procedures, or for those studying for the JNCIE lab exams.
Junos CLI Options
This video demonstrates using the operational mode set cli command to configure options for an administrator’s CLI session on a Junos platform.
Junos CLI Shortcuts
This video covers Emacs key sequences and use of the "top" command in conjunction with "show" and "set" configuration commands to assist in the configuration and navigation of the Junos CLI.
Junos CLI Shortcuts
This video covers Emacs key sequences and use of the "top" command in conjunction with "show" and "set" configuration commands to assist in the configuration and navigation of the Junos CLI.
Junos Config Management Using J-Web on vSRX
This video covers how to manage Junos configs on vSRX platforms using J-Web. This training is most appropriate for users who are new to working with vSRX but prefers to use GUI instead of CLI.
Junos Device Serial Number
This video describes using operational mode cli commands to display a Junos device serial number. This training is most appropriate for administrators who need provide a device serial number for support, licensing, or inventory. If you’d like to learn more basic Junos commands, take the Introduction to the Junos Operating System (IJOS) course available in instructor-led or self-paced ‘labs and learning’ versions.
Junos DNS Name Resolution
This video demonstrates using the operational mode show host command to verify name server configuration and resolve hostnames on a Junos platform.
Junos Password Recovery
This video covers the basic procedure for recovering the password on a Junos device. This training is most appropriate for new users of the Junos OS or anyone looking to become more familiar using the password recovery procedure.
Junos Space DMI Schemas
This video covers how to work with DMI schemas in Junos Space. This training is most appropriate for users who are new to working with Junos Space or anyone looking for a quick-start guide of how to work with DMI schemas. Want more? Check out the Junos Space Essentials (JSE) course.
Junos Space Image Management
This video covers how to perform software upgrades of Junos devices using Junos Space. This training is most appropriate for users who are looking to understand how to manage Junos software using the Junos Space Network Management Platform application.
Junos Space Initial Install
This video describes the two Junos appliances—the physical appliance and the virtual appliance—and describes the requirements for installing the virtual appliance. The training further describes setup and configuration options.
Junos Space Log Director Installation
This video covers the installation of Log Director to an existing Junos Space deployment. This training is most appropriate for users of Junos Space Security Director.
Junos Space Network Director Image Management
Learn how to stage and upgrade Junos devices in the Junos Space Network Director application. This training is most appropriate for users who are new to working with Network Director or anyone looking for a quick-start guide of how to work with Network Director image management.
Junos Space Resetting the Default Password
This video covers how to reset the CLI and Web interface passwords for users in Junos Space. This training is most appropriate for users who are new to working with Junos Space or anyone looking for a quick-start guide of how to recover user accounts in Junos Space.
Junos Space Security Director - Hub and Spoke VPNs
This video covers how to configure and use VPN policies within Security Director. This training is most appropriate for users who are new to working with Security Director or anyone looking for a quick-start guide of how to configure and use Hub and Spoke VPNs within Security Director.
Junos Space Security Director - Variable Objects
Learn how to configure and use variable objects within Security Director. This training is most appropriate for users who are new to working with Security Director or anyone looking for a quick-start guide of how to configure and use variable objects within Security Director.
Junos Space Security Director 12.2 Policy Locking
Policy Locking is a new feature that was introduced in Security Director version 12.2. This video provides you with an overview of policy locking, and will demonstrate how it can be applied to a policy within Security Director. This training is appropriate for users who are just beginning to use Junos Space Security Director or users who have not yet seen the policy locking feature introduced in version 12.2
Junos Space Service Now
This video explores the enablement and configuration of the Junos Space Service Now and Service Insight applications. After viewing this training, you will understand how to connect to Juniper Support Systems (JSS) so you can use the Service Now and Service Insight applications.
Junos WebApp Secure Basic Configuration
This video covers the new Junos Web App Secure Text-Mode Setup Utility and provides an overview of the interface and basic network configuration. This training is appropriate for individuals who are new to using Junos WebApp Secure series of products.
Junos WebApp Secure Interfaces Overview
This video covers the new Junos Web App Secure appliance and provides an overview of the Configuration and Security Monitoring interfaces used to manage and monitor Junos Web App Secure. This training is appropriate for individuals who are new to using Junos WebApp Secure series of products.
Junos WebApp Secure Password Setup
Learn how to change the administrative password in a new or existing installation. This training is appropriate for all users of Junos WebApp Secure.
Junos-PythonEZ (PYEZ) - Basics
This video provides an overview of command line basics using Python 2.7 interpreter and PYEZ libraries. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos Automation.
Junos-PythonEZ (PYEZ) - Basics
This video provides an overview of command line basics using Python 2.7 interpreter and PYEZ libraries. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos Automation.
Junos-PythonEZ (PYEZ) - Installation
This video provides an overview of setting up a Python 2.7 practice environment that uses VMware Workstation, Ubuntu, Junos-PythonEZ. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos Automation.
Junos-PythonEZ (PYEZ) - Installation
This video covers setting up a Python 2.7 practice environment that uses VMware Workstation, Ubuntu, Junos-PythonEZ. This training is appropriate for all users of the Junos or anyone looking to learn more about Junos Automation.
Link Aggregation Group Overview
This video will provide an overview of configuring aggregated Ethernet interfaces. The configuration of aggregated Ethernet interfaces enables multiple Ethernet interfaces to be grouped together and form a single link layer interface also know as a link aggregation group (LAG). A step-by-step demo will illustrate the configuration of a LAG on an EX Series switch. This training is most appropriate for users unfamiliar with LAG configuration using the Junos OS.
Log Filtering on a Junos Device
This video demonstrates using operational mode cli commands to filter the output of a show log command on a Junos platform. This training is most appropriate for administrators who need to analyze and troubleshoot Junos devices using log information.
Login Message
This video demonstrates how to configure Junos to display a message before the login prompt for all administrators connecting to a network device. This training is most appropriate for administrators who are responsible for managing or securing Junos platforms. If you want to learn more about securing Junos devices, sign up for the Junos Security (JSEC) course.
Managing Junos Devices Using REST API
This video demonstrates how to manage Junos devices using REST API. Since most programming languages can communicate with REST API , programmers can easily integrate with Junos devices with REST without learning Junos CLI.
Managing vMX Bridges Using Virt-manager in a KVM Hypervisor
This video illustrates how to use virt-manager to manage bridges in a KVM hypervisor.
Managing vMX Interfaces with a KVM Hypervisor
This video illustrates a couple of methods for managing vMX interfaces when using a KVM hypervisor.
Mist Access Point Onboarding
This video provides a brief and simple demonstration of setting up a single Mist Access Point. This training is ideal for engineers that are new to working with Mist access points.
Mobile Broadband Gateway - Call Trace
This video is appropriate for operators of an MX Ethernet Services Router to assist in troubleshooting the mobile sessions of attaching subscribers. There is a short lecture followed by a demonstration that covers how to start, stop, and analyze a call trace.
Mobile Broadband Gateway - Call Trace
This training is appropriate for operators of an MX Ethernet Services Router to assist in troubleshooting the mobile sessions of attaching subscribers. There is a short lecture followed by a demonstration that covers how to start, stop, and analyze a call trace.
MPLS Basics
This video covers basic steps for initial MPLS configuration in the Junos OS. This training is most appropriate for users who are just beginning to use MPLS features of the Junos OS, or anyone looking for a quick-start guide for basic MPLS configuration in the Junos OS.
MPLS OAM: BFD for LDP-Signalled LSPs
This video shows you how to configure and view the status of bidirectional forwarding detection (BFD) for LDP-signaled MPLS LSPs. This training is appropriate for all users who configure LDP-signaled MPLS LSPs on JUNOS-based platforms.
MPLS OAM: BFD for RSVP-Signalled LSPs
This video shows you how to configure and view the status of bidirectional forwarding detection (BFD) for RSVP-signaled MPLS LSPs. This training is appropriate for all users who configure RSVP-signaled MPLS LSPs on JUNOS-based platforms.
MSDP
This video covers the theory and configuration of Multicast Source Discovery Protocol (MSDP) as well as an example of configuring MSDP and anycast-RP. This training is most appropriate for users who need a basic understanding of MSDP and how to configure and test the protocol.
Multichassis Link Aggregation Groups
This video provides an introduction to Multichassis Link Aggregation Groups. Both modes, Active-Standby and Active-Active, are explained, configured, and monitored using a sample topology with three MX routers. This training is appropriate for all users of the MX Series product family (MPCs required for Active-Active mode).
NAT64 with DNS64 on SRX Series - Part 1
This video covers NAT, a well-known technology in IPv4 to rewrite source or destination IP addresses in the IP header in order to hide the original addresses. The communication between a IPv6-only client and a IPv4-only server can be achieved by rewriting the protocol header's source and destination addresses from IPv6 to IPv4.
NETCONF, XML, and XPath
This video introduces NETCONF, XML and XPath and how they can be incorporated into automation.
Nonstop Bridging
Review the implementation of nonstop bridging on Juniper Networks EX Series Ethernet Switches and provides a demonstration of its functionality.
NorthStar Controller
This video explains the functionality of the product. The administrative interface is explored and used to create a bi-directional LSP dynamically between a pair of MX routers. This training is most appropriate for administrators who need to manage MPLS environments in a centralized, dynamic, and automated environment.
NorthStar Controller
This video explains the functionality of the product. The administrative interface is explored and used to create a bi-directional LSP dynamically between a pair of MX routers. This training is most appropriate for administrators who need to manage MPLS environments in a centralized, dynamic, and automated environment.
NorthStar Controller Analytics
This video demonstrates NorthStar Controller Analytics capabilities and how it can be used to adjust traffic flows across a WAN.
NTP in a Chassis Cluster
This video covers how to properly configure NTP in a SRX series chassis cluster. This training is most appropriate for users who are just beginning to configure NTP in the Junos OS for an SRX series chassis cluster, or anyone looking for a quick-start guide for basic NTP configuration in the Junos OS.
OSPF Routing: J-Web
This video covers how to configure OSPF routing using J-Web. This training is most appropriate for users who are new to working with OSPF routing or anyone looking for a quick-start guide of how to configure OSPF routing using J-Web.
OSPF Segment Routing Configuration
This video covers configuring OSPF to support segment routing.
OSPFv2 Adjacency Formation
This video explains the fundamentals of how OSPF adjacencies are formed, in particular on devices running the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to better understand OSPF adjacency formation on Junos-based devices.
OSPFv2 Authentication
This video explains the options and functionality of OSPFv2 authentication for devices running the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to enable OSPFv2 authentication on Junos-based devices.
OSPFv2 Neighbor Adjacency and Timers
This video explains the fundamentals of how hello and dead timers work between OSPF neighbors, in particular on devices running the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to better understand OSPF timers on Junos-based devices.
OSPFv2 Neighbor Adjacency/Timers
This video explains the fundamentals of how hello and dead timers work between OSPF neighbors, in particular on devices running the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to better understand OSPF timers on Junos-based devices.
OSPFv2 Neighborships vs Adjacencies on Broadcast and NBMA Networks
This video discusses the OSPF 2-way state ‘problem’ that can occur on broadcast and NBMA networks. With a short lecture followed by a demonstration, this training is appropriate for intermediate users, or anyone looking to better understand OSPF neighborship and adjacency formation on broadcast/NBMA networks.
OSPFv2 Neighborships vs Adjacencies on Broadcast/NBMA Networks
This video discusses the OSPF 2-way state 'problem' that can occur on broadcast and NBMA networks. With a short lecture followed by a demonstration, this training is appropriate for intermediate users, or anyone looking to better understand OSPF neighborship and adjacency formation on broadcast/NBMA networks.
OSPFv2 Router ID Assignment on Junos Devices
This video explains the fundamentals of how router IDs are assigned to devices running OSPF on the Junos OS. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to better understand OSPF router ID assignment on Junos-based devices.
Overcoming Overlapping IP Addresses with Static NAT
This video covers how to configure static NAT on SRX Series devices to overcome problems with overlapping IP addresses. This training is most appropriate for users who are looking to understand how to configure static NAT on SRX Series devices to overcome problems with overlapping IP addresses. If you want to learn more about this topic, check out the Advanced Junos Security (AJSEC) course.
Overview and Upgrade of a QFabric System
This video provides a brief overview of the basic components used in a QFX3000-G and QFX3000-M QFabric system. It also covers the necessary steps when upgrading the QFabric system. A hands on example upgrading from 12.2X50-D20.4 to 12.2X50-D30.4 is covered in this training.
Ping MPLS for LSPs
This video provides detailed coverage of the operational mode ping command that is available for MPLS LSPs. It answers questions that are usually asked by attendees of the Junos MPLS and VPNs class, or by customers working on a case with JTAC. A demonstration of the command is shown after a brief introduction.
Plaintext-vs-Encrypted Passwords
This video is appropriate for new users of the Junos Operating System to assist them in understanding the differences between using plain-text and encrypted passwords when configuring login parameters. There is a short lecture followed by a demonstration that covers when and why you should choose to use each configuration method as well as how not to use the encrypted password method.
Policy Tracing
Policy Tracing allows you to troubleshoot issues by tracking events when a user signs in and access resources using the Junos Pulse Secure Access Service. Policy Tracing is used simultaneously while a user is signing in and attempting to access secured resources. This video demonstrates how Policy Tracing is used to troubleshoot authentication and authorization issues.
Proxy ARP
This video covers the function of Proxy ARP in an enterprise network and how it works with NAT on an SRX device. This training is most appropriate for intermediate users of Junos or anyone looking to learn about Proxy ARP.
QFX Revenue Port Layout QFX3600
This video briefly describes the supported interface types and speeds on the QFX3600 switch and shows you how to configure them, both in standalone and Fabric mode.
Real-time Performance Monitoring (RPM)
Real-time performance monitoring (RPM) allows you to perform service level monitoring. When configured on a device, RPM calculates the network performance based on packet response time, jitter and packet loss. This training demonstrates the configuration of an RPM probe, setting test parameters and displaying the test results.
Remote Access VPN - CLI
This video covers how to configure remote access VPNs with pre-shared keys, using the NCP Exclusive Remote Access client, in the Junos OS CLI. This training is most appropriate for users who are new to working with remote access VPNs.
Remote Access VPN - J-Web
This video covers how to configure remote access VPNs with pre-shared keys, using the NCP Exclusive Remote Access client, in the J-Web. This training is most appropriate for users who are new to working with remote access VPNs.
Request Support Information
This video describes using the operational mode request support information command to collect relevant information and resolve a support case. This training is most appropriate for administrators who need provide diagnostic information to Juniper Networks to resolve a support case.
Returning a Virtual Chassis to Standalone Mode
This video covers how to return switches in a multi-node virtual chassis back to standalone devices. This training is most appropriate for users who need a basic understanding of disabling a virtual chassis on the EX switching platform.
RingMaster - Client Interface Overview
This video offers a tour of the major functional areas of the RingMaster Client interface used for WLAN full life-cycle management. This training is appropriate for individuals who are new to the Juniper WLAN solution
RingMaster - Configuring SNMP for Monitoring
This video shows you how to setup SNMP using RingMaster and the CLI. Then verify that RingMaster is receiving the appropriate SNMP data for the equipment, client, and security monitoring features. This training is appropriate for all users of the Juniper Wireless LAN system or anyone looking to learn more about SNMP setup and Monitoring features.
RingMaster - How to Create A Network Plan
This video provides a step-by-step example of how to create a RingMaster Network Plan. This training is appropriate for individuals who are new to the Juniper WLAN solution.
RingMaster - Server Overview
This video offers a tour of the RingMaster Server interface functional areas to include: Setup, Plan Management, Access Control, Reports, and Maintenance. This training is appropriate for individuals who are new to the Juniper WLAN solution.
RIP Routing: J-Web
This video covers how to configure RIP routing using J-Web. This training is most appropriate for users who are new to working with RIP routing or anyone looking for a quick-start guide of how to configure RIP routing using J-Web.
Route Preference and Administrative Distance
This video provides details on Junos route preference and active route selection. This training is most appropriate for new users of Junos or anyone looking to learn about Route Preference.
Route Preference/Administrative Distance
This video provides details on Junos route preference and active route selection. This training is most appropriate for new users of Junos or anyone looking to learn about Route Preference.
Route Sharing on Junos Devices Using instance-import
There are many use cases where it's necessary to share routes between routing tables. The instance-import feature provide the ability to easily share routes between routing-instances on a Junos device. This training is appropriate for new users, or anyone looking to learn about enabling the instance-import feature on Junos-based devices.
Route Sharing on Junos Devices Using RIB Groups
There are many use cases where it’s necessary to share routes between routing tables. RIB groups provide the ability to share routes between multiple routing tables on a Junos device. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to learn about enabling RIB groups on Junos-based devices.
Routed VLAN Interface for EX Series Switches (Chinese Language)
This video describes the routing function evolution on switch, define what setting must be done in doing IP routing. This training is most appropriate for users who are configuring an EX-series switch with the routing function. To get the most out of this training, users should be familiar with the material covered in the Introduction to Junos Software class.
Routed VLAN Interface for EX Switch (Chinese Language)
This video describes the routing function evolution on switch, define what setting must be done in doing IP routing. This training is most appropriate for users who are configuring an EX-series switch with the routing function. To get the most out of this training, users should be familiar with the material covered in the Introduction to Junos Software class.
Router IDs
This video covers the functionality of router IDs in a network that uses dynamic routing protocols. This training is most appropriate for new users of Junos or anyone looking to learn about Router IDs.
Running Junos RPC Commands Using Ansible
This video demonstrates the process of running Junos Remote Procedure Calls (RPC) commands through Ansible. RPC’s provides a faster way to communicate with Junos devices.
Searching Events in STRM
This video explores the search capabilities of Security Threat Response Manager (STRM). After viewing this training, you will understand the capabilities of the Search and Filter functions on the STRM system.
Security Policy Schedulers
This video covers how to configure and apply schedulers to security policies in the Junos OS. This video also covers the process of verification that the scheduler is actually working and how to troubleshoot if the scheduler isn't working correctly. This training is most appropriate for users who are familiar with configuring security policies in Junos OS.
Segment Routed LSP Routing Preference
This video demonstrates adjusting the routing preference value for a segment routed LSP.
Segment Routing and the OSPF LSDB
This video discusses analyzing segment routing data stored in the OSPF link state database.
Segment Routing Basic Traffic Engineering
This video covers how to configure and verify segment routing traffic engineering. This training is most appropriate for users who are new to working with segment routing.
SERIES PSM: Checking PSM Health and Connectivity
This video is part of a collection of short "How To" instruction modules that cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
SERIES PSM: Configuring the PSM Client to Use Software Utilities in Non-Default Folders
This video is part of a collection of short "How To" instruction modules that cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
SERIES PSM: Creating an Ethernet Service on Your Network Using the PSM
This video is part of a collection of short "How To" instruction modules that cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
SERIES PSM: Creating an Ethernet Virtual Private Service Using the PSM
This video is part of a collection of short "How To" instruction modules that cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
SERIES PSM: Executing a Link Trace on Ethernet Service Using PSM
This video is part of a collection of short "How To" instruction modules that cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
SERIES PSM: Understanding the Topology Displayed by the PSM
This video is part of a collection of short "How To" instruction modules that cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
SERIES: Branch SRX
This play list covers SRX Series.
SERIES: Deploying Automated Support and Prevention (ASAP) Learning Byte
This 4-part series— Deploying ASAP learning byte — will guide you through installing, configuring, troubleshooting, and thoroughly understanding Juniper Networks ASAP solution including the Service Now and Service Insight applications. ASAP is Juniper’s solution for the fastest and most thorough method to detect, prevent, and resolve hardware and software faults on Junos platforms. ASAP includes the applications Service Now and Service Insight which operate on the Junos Space Network Management Platform. Service Now works in conjunction with Advanced Insight Scripts (AI-Scripts) to automate troubleshooting data collection and end-to-end, zero-touch JTAC case creation. Service Insight provides reporting for end of life (EoL) and proactive bug notifications (PBNs). Troubleshooting data (Juniper Message Bundles, JMBs) collected by AI-Scripts are packaged to integrate seamlessly with ASAP’s automated data analysis system, Juniper Case Attachment Tool Suite (JCATS). JCATS will scan JMBs, detect known issues, and report findings to JTAC engineers to assist in expediting case resolution.
SERIES: Junos Basics Learning Bytes
This play list covers Junos basic configuration procedures and steps.
SERIES: ProNX Management System (PSM) “How to” Learning Bytes
"How to" instructional videos that cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
SERIES: WANDL Learning Bytes
This video explains some of WANDL IP/MPLSView's capabilities and explores the IP/MPLSView administrative interface. This training is most appropriate for administrators who need to analyze the performance of the MPLS core network.
Setting the Virtual Chassis Mode
This video explains the fundamentals of how to use the Junos OS CLI to change the Virtual Chassis mode of an EX or QFX Series device. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to better understand enabling the Virtual Chassis or Virtual Chassis Fabric technologies.
Setting Up an SRX Chassis Cluster with J-Web
This video covers how to setup an SRX chassis cluster using J-Web. This training is most appropriate for users who are new to working with chassis clustering on SRX devices or anyone looking for a quick-start guide of how to work with chassis clusters using J-Web on SRX devices.
Sky ATP Demo Part 1
This video covers enrollment and setup of Sky ATP with SRX Series devices. This training is most appropriate for users who are new to working with Sky ATP.
Sky ATP Demo Part 2
This video covers monitoring infected hosts within Sky ATP. It also covers how to use Sky ATP threat prevention policies on SRX series devices using J-Web. This training is most appropriate for users who are new to working with Sky ATP.
Sky ATP SMTP: CLI
This video covers how to configure Sky ATP SMTP email protection using the CLI. This training is most appropriate for users who are new to working with Sky ATP SMTP email protection.
Sky ATP SMTP: J-Web
This video covers how to configure Sky ATP SMTP email protection using J-Web. This training is most appropriate for users who are new to working with Sky ATP SMTP email protection.
Sky ATP SMTP: Security Director
This video covers how to configure Sky ATP SMTP email protection using Security Director. This training is most appropriate for users who are new to working with Sky ATP SMTP email protection.
Sky ATP Web Protection: CLI
This video covers how to configure Sky ATP Web protection using the CLI. This training is most appropriate for users who are new to working with Sky ATP Web protection.
Sky ATP Web Protection: J-Web
This video covers how to configure Sky ATP Web protection using the J-Web. This training is most appropriate for users who are new to working with Sky ATP Web protection.
Sky ATP Web Protection: Security Director
This video covers how to configure Sky ATP Web protection using Security Director. This training is most appropriate for users who are new to working with Sky ATP Web protection.
SLAX Scripting Part 1
This training provides a dive into SLAX scripting with examples, XML/XPATH basics, and writing your first "hello world!" script.
SRX - IPSec Traffic Selector
IPSec encrypts data that goes into a certain tunnel based on a agreed Security Association (SA), whereby each Phase 2 SA is defined for a unidirectional data flow covering data traffic that is distinguishable by a so called proxy-ID. In IKEv2 there is a new term called traffic-selector which serves the same purpose as the proxy-ID, however traffic-selector is something that can be defined on an per-SA basis using the two fields, source IP address and destination IP address. The traffic-selector helps to define source and destination patterns that are allowed through a route-based VPN tunnel and helps to enforce data to SA mapping and thus prevents traffic from being transported through the tunnel that there is no negotiation existing for. This training demonstrates how to configure route-based VPNs on Juniper SRX series devices.
SRX AppSecure - Basic Application Firewalling
This video covers basic configuration for application firewall rules in the Junos OS. This training is most appropriate for users who are just beginning to configure and use application firewalling in the Junos OS, or anyone looking for a quick-start guide for basic application firewall configuration in the Junos OS.
SRX Forwarding Modes
This video explains and demonstrates the different types of data plane forwarding modes that can be performed on Juniper Networks Branch SRX Series Services Gateways. It covers packet-based mode, flow-based mode, and selective stateless packet services. This training is most appropriate for intermediate users of Junos, or anyone looking to learn about SRX packet forwarding behaviors.
SRX Forwarding Modes
This video explains and demonstrates the different types of data plane forwarding modes that can be performed on Juniper Networks Branch SRX Series Services Gateways. It covers packet-based mode, flow-based mode, and selective stateless packet services. This training is most appropriate for intermediate users of Junos, or anyone looking to learn about SRX packet forwarding behaviors.
SRX IPv6 source NAT: Part 1 - NAT66 for IPv6 only hosts
This video covers (source) NAT strategies for IPv6 only hosts. Part 1 starts introducing JunOS SLAAC and DHCPv6 configuration, for hosts requiring L3 addressing. It then describes the use of source NAT66, to translate IPv6 ULA addresses to public routable IPv6 prefixes. Please, note that the present recording does not cover IPv4 NAT connectivity options for IPv6 hosts, since this topic will be presented during Part 2. To get the most out of this training, learners should be familiar with the IPv6 addressing schemes, L3 NAT functionalities and DNSAAAA (IPv6) and A (IPv4) records.
SRX Series J-Web Access
This video discusses enabling the J-Web interface to administer an SRX Series security device.
SRX Source NAT
This video is appropriate for new users of the SRX looking for SRX Source NAT functionality as well as configuration examples on how to implement these features. This training starts with a short lecture about SRX Source NAT followed by a demonstration on how to configure the three types of Source NAT.
SSM Features
This video covers Source Specific Multicast operation and configuration on Junos devices. This video also covers features to allow user devices to intercommunicate with user PCs that are not IGMP version 3 capable in a SSM environment. This video also shows commands that allow for interaction between IGMP version 2 and 3 devices. This training is most appropriate for users that have attended the Introduction to the Junos Operating System (IJOS) and Junos Intermediate Routing (JIR) courses or have equivalent experience.
Static NAT with the J-Web Wizard
This video covers how to configure static NAT in J-Web using the wizard. This training is most appropriate for users who are new to working with NAT or anyone looking for a quick-start guide of how to configure static NAT using the J-Web wizard.
Static Routing: J-Web
This video covers how to configure static routing using J-Web. This training is most appropriate for users who are new to working with static routing or anyone looking for a quick-start guide of how to configure static routing using J-Web.
Switching Basics on EX Series Switches Part 2
Welcome to the world of the Spanning Tree Protocol. This video reviews the importance of the spanning tree protocol and details how to configure an EX series switch to use the Multiple Spanning Tree Protocol.
Switching Basics on the EX Series Switches Part 1
This video covers the basics of switching and how frames are sent between hosts on the network and how the switch knows where to send the frame. This training is appropriate for anyone looking to learn the basics of switching on Junos platforms.
Topology Independent In-Service Upgrade / Junos OS for QFX5100 and EX4600 Series Switches
The Topology Independent In-Service Upgrade (TISSU) feature allows in-service software upgrades on the QFX5100 and EX4600 Series switches without redundant hardware-based Routing Engines. This training is appropriate for users interested in performing a TISSU on their QFX5100 and EX4600 Series switches.
Topology Independent In-Service Upgrade in Junos OS for QFX5100 and EX4600 Series Switches
The Topology Independent In-Service Upgrade (TISSU) feature allows in-service software upgrades on the QFX5100 and EX4600 Series switches without redundant hardware-based Routing Engines. This training is appropriate for users interested in performing a TISSU on their QFX5100 and EX4600 Series switches.
Troubleshooting OSPF Case Studies
This video demonstrates two case studies of OSPF troubleshooting -- adjacency issue and suboptimal path.
Troubleshooting Services in Contrail
Learn how to monitor and troubleshoot services within Contrail. This training is most appropriate for users who are new to working with Contrail or anyone looking for a quick-start guide of how to troubleshoot Contrail services.
Understanding the Topology Displayed by the PSM
This video is part of a collection of short "How To" instruction modules that cover various aspects of the operation, configuration and usage of BTI System's ProNX management system, a.k.a. the PSM.
Understanding Unified Policies Processing
This video covers how unified policy processing order on SRX devices functions. This training is most appropriate for users who are new to working with unified policies on SRX devices or anyone looking for a quick-start guide of how to work with unified policies on SRX devices.
Upgrading Junos on an EX2200 Virtual Chassis
This video discusses the differences between upgrading Junos on an EX2200 Virtual Chassis compared with other models of EX switches in a Virtual Chassis before showing how to perform the upgrade itself.
Upgrading the Junos Space Network Application Platform
This video covers how to properly upgrade the code version of the Network Application Platform application within Junos Space. This training is most appropriate for users who are just beginning to work with Junos Space, or anyone looking for a quick-start guide for basic Junos Space operations.
Upgrading the Junos Space Network Application Platform
This video covers how to properly upgrade the code version of the Network Application Platform application within Junos Space. This training is most appropriate for users who are just beginning to work with Junos Space, or anyone looking for a quick-start guide for basic Junos Space operations.
Use Junos Space Network Director to Facilitate Zero Touch Provisioning
Learn how to configure and use zero touch provisioning within Network Director. This training is most appropriate for users who are new to working with Network Director or anyone looking for a quick-start guide of how to configure and use zero touch provisioning within Network Director.
User Management with Security Director
This video covers how to manage users on SRX Series devices with Security Director. This training is most appropriate for users who are new to working with Security Director.
Using Ansible to perform power operations on Junos device
This video covers how to perform power operations using Ansible. This training is most appropriate for users who are looking to automate power operations of multiple Junos devices using Ansible.
Using Ansible to zeroize multiple Junos devices
This video covers how to zeroize multiple Junos devices with Ansible. This training is most appropriate for users who are looking to automate deployment of multiple Junos devices using Ansible.
Using Application Tracking
This video covers how to configure application tracking using the Junos OS CLI. This training is most appropriate for users who are new to working with application tracking.
Using Application Tracking with J-Web
This video covers how to configure application tracking using the J-Web. This training is most appropriate for users who are new to working with application tracking.
Using Dynamic Applications in Unified Policies with CLI
This video covers how to use dynamic applications with unified policies on SRX devices using the CLI. This training is most appropriate for users who are new to working with dynamic applications and unified policies on SRX devices or anyone looking for a quick-start guide of how to work with dynamic applications and unified policies on SRX devices.
Using Generated Routes
This video covers what the difference is between an aggregate and generated route as well as an example of generating a route based on upstream connectivity. This training is most appropriate for users who need a basic understanding of generated routes and how to configure and test them.
Using Interface Range and Configuration Groups Features
This video describes the IPv6 addressing scheme and compares IPv6 to IPv4. A demonstration is provided to illustrate how an IPv6 address can be easily added to an interface using the Junos CLI. This training is most appropriate for intermediate users who are unfamiliar with the IPv6 addressing scheme.
Using Interfaces with Security Director
This video covers how to configure interfaces on SRX Series devices using Security Director. This training is most appropriate for users who are new to working with Security Director.
Using IPS Templates with Security Director
This video covers how to work with IPS templates on SRX devices using Junos Space Security Director. This training is most appropriate for users who are new to working with IPS templates and Security Director or anyone looking for a quick-start guide of how to work with IPS templates with Security Director on SRX devices.
Using Routing Instances in Security Director
This video covers how to configure routing instances on SRX Series devices using Security Director. This training is most appropriate for users who are new to working with Security Director.
Using Schedulers with Security Director
This video covers how to work with schedulers on SRX Series devices using Junos Space Security Director. This training is most appropriate for users who are new to working with schedulers on SRX Series devices with Security Director or anyone looking for a quick-start guide of how to work with schedulers with Security Director on SRX Series devices.
Using Screens with Security Director
This video covers how to configure and monitor screens on SRX series devices with Security Director. This training is most appropriate for users who are new to working with SRX Series devices.
Using Screens with the CLI
This video covers how to configure and monitor screens on SRX Series devices with the CLI. This training is most appropriate for users who are new to working with SRX Series devices.
Using Screens with the J-Web
This video covers how to configure and monitor screens on SRX series devices with the J-Web. This training is most appropriate for users who are new to working with SRX Series devices.
Using Scripts in Junos Space
This video covers how to manage scripts using Junos Space. This training is most appropriate for users who are looking to understand how to manage scripts using the Junos Space Network Management Platform application.
Using Security Zones in the CLI
This video covers how to configure security zones with the CLI for SRX Series devices. This training is most appropriate for users who are new to working with security zones and SRX Series devices.
Using Security Zones with Security Director
This video covers how to configure security zones with Security Director for SRX Series devices. This training is most appropriate for users who are new to working with security zones and Security Director.
Using Static Routes with Security Director
This video covers how to configure static routes on SRX Series devices using Security Director. This training is most appropriate for users who are new to working with Security Director.
Using Static Routes with the CLI
This video covers how to configure static routes with the CLI. This training is most appropriate for users who are new to working with Junos.
Using the AppFormix Dashboard
This video covers how to use the AppFormix dashboard to quickly determine the state of a network. This training is most appropriate for users who are new to working with the AppFormix dashboard or anyone looking for a quick-start guide of how to work with the AppFormix dashboard.
Using the Enhanced Layer 2 Software (ELS) Translation Tool
This video provides an overview of Enhanced Layer 2 Software using the Junos OS. After the overview, a demonstration is given using the ELS Translation tool. The tool is used to translate older style Junos Layer 2 CLI into newer Junos ELS CLI. The demonstration provides an example of a mocked migration from EX4200 switches to EX4300 switches.
Using the External port for Admin Access
Learn how to enable the external port for administrative access on the Junos Pulse Secure Access Service and Junos Pulse Access Control Service.
Using the Junos Master Password Feature
This video covers how to encrypt passwords securely in Junos using the master password feature. This training is most appropriate for users who are new to working with Junos.
Using the Monitoring Tool on the proNX Optical Director
This video explains the monitoring features in the proNX Optical Director and demonstrates how to use the Network view tool and the logical system view tool.
Using the Policy Enforcer Wizard
This video covers how to configure Policy Enforcer using the Policy Enforcer wizard in Security Director. This training is most appropriate for users who are new to working with Policy Enforcer.
Using the Sky ATP Evaluation License
This video covers how to find and use the Sky ATP evaluation license. This training is most appropriate for users who are new to working with Sky ATP.
UTM Content Filtering
This video covers how to configure UTM content filtering using J-Web. This training is most appropriate for users who are new to working with UTM content filtering on SRX devices or anyone looking for a quick-start guide of how to work with UTM content filtering using J-Web on SRX devices.
Virtual Chassis Fabric: Automatic Software Upgrades
This video explains the fundamentals of how to configure the Junos OS CLI to automatically perform a software upgrade on newly added members of a Virtual Chassis or Virtual Chassis Fabric. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to better understand enabling the Virtual Chassis or Virtual Chassis Fabric technologies.
Virtual Chassis Fabric: Master RE Console Port
This video explains how to find and access the console port of the master RE in a Virtual Chassis or Virtual Chassis Fabric using EX or QFX Series devices. With a short lecture followed by a demonstration, this training is appropriate for new users, or anyone looking to better understand enabling the Virtual Chassis or Virtual Chassis Fabric technologies.
Virtual Chassis Troubleshooting
A Virtual Chassis is a collection of Juniper Networks EX and QFX Series switches that are interconnected and appear and can be managed as a single entity. This training is appropriate for users deploying a Virtual Chassis that may need some guidance with troubleshooting the Virtual Chassis formation process.
vMX 60-Day Trial License Installation
This video demonstrates retrieving and installing a 60-day trial license on a vMX platform.
vMX on AWS
This video discusses launching a vMX platform in the Amazon Web Services (AWS) environment.
VRF-table-label
VRF-table-label maps the inner label of a packet to a specific VPN routing and forwarding (VRF) instance. This allows the examination of the encapsulated IP header. This training is appropriate for intermediate users with a background in the basics of MPLS, L3VPN and MPBGP in the Junos OS, or anyone looking to learn about VRF-table-label.
VRF-table-label
VRF-table-label maps the inner label of a packet to a specific VPN routing and forwarding (VRF) instance. This allows the examination of the encapsulated IP header. This training is appropriate for intermediate users with a background in the basics of MPLS, L3VPN and MPBGP in the Junos OS, or anyone looking to learn about VRF-table-label.
What is 6PE?
This video covers 6PE which allows Service Providers to provide new revenue-generating services to their customers by offering native IPV6 connectivity without the need to upgrade the provider (P) core routers and with no impact on existing IPv4 and MPLS services.
Who's Logged In?
This video describes using operational mode commands to display currently logged in administrators and demonstrates a way to forcibly log them off.
Wildcard Delete
This video demonstrates using the wildcard delete command to remove multiple objects from a Junos device configuration file.
WLAN - Configuring a WLAN Captive Portal
Learn how to configure a captive portal for user login to a wireless network, and how to set this up through both the Ringmaster GUI and the WLC CLI.
WLAN - Configuring the Mobility Domain
This video shows you the different methods (RingMaster and CLI) you can use to create a VLAN and ways to verify and test the configuration. This training is appropriate for all users of the Juniper Wireless LAN system or anyone looking to learn more about how to create a VLAN on the Juniper Wireless Solution.
WLAN - Remote Site AP
This video explains how to configure support for an AP located in a different site/country then the controller.
WLAN - Ringmaster User Access and Rights
RingMaster has capabilities for very granular user access. This training gives you a walk through of how this is configured.
WLAN - WLC Troubleshooting "show tcp"
This video discusses the show tcp command in the MSS OS, and explains the purpose of this command as an aid to troubleshooting connectivity towards a Wireless LAN Controller. This training includes a demonstration of the show tcp command.
Working with Policy Enforcer
This video covers how to configure and use Policy Enforcer in Security Director. This training is most appropriate for users who are new to working with Policy Enforcer.
Zero Touch Provisioning / Junos OS for EX and QFX Series Switches
Zero Touch Provisioning (ZTP) is a feature used on Juniper Networks switches to automate day one provisioning tasks. This training is appropriate for users interested in automating the deployment of EX and QFX Series switches in their network environment.
Zero Touch Provisioning in Junos OS for EX and QFX Series switches
Zero Touch Provisioning (ZTP) is a feature used on Juniper Networks switches to automate day one provisioning tasks. This training is appropriate for users interested in automating the deployment of EX and QFX Series switches in their network environment.