This self-paced On-Demand eLearning course is designed to provide fundamental instruction on segment routing, or Source Packet Routing in Networking (SPRING). The course focuses on the configuration of Juniper Networks routing and switching devices to support segment routing using MPLS switching. Topics include functional concepts, the configuration of the IGPs used to propagate label information within a domain, segment routing traffic engineering using BGP colored routes, and redundancy/high availability concepts including BFD, Topology Independent Loop-Free Alternative (TI-LFA), Anycast Segments, and the implementation of link aggregation in a segment routing design. Watch a Sneak Peek

Purchase Includes: 365 Days of Access
Difficulty Level: Advanced
Last Updated: Monday, March 2, 2020

Please note the On-Demand version of this course is 1-day (8 hours) based on Junos v19. The instructor-led version of the course was updated on Sept 6, 2024 to 4-days (32 hours) based on Junos v23.4R1.10. On-Demand courses are typically updated within 5-months following the instructor-led course.

Additional Details
Course Modules
#ModuleDurationLabRequired
0
How to Use this On Demand Course

To launch the course, click the module titles below. Please be patient as the content downloads to your system. As you complete each module, close the module window and launch the next module from this page. You will need to launch all required modules for the course to be considered complete.

If the module has a lab component, you will have access to our virtual lab environment. In order to use the lab portion of the training you will need to enable your lab access. Click the "Enable Lab Access" button to enable your lab access and follow the instructions in the individual training modules to access the labs when instructed. If this is your first time using the On Demand lab environment, please Watch a Quick Lab Tutorial.

Important: For the best experience with this course we recommend that you use the latest version of Firefox, Chrome, Safari or Microsoft Edge. Older versions of Internet Explorer have been shown to have issues, therefore, we do not recommend using this browser.

If you have any technical problems with the course modules or the lab environment please open a ticket.

5m
1
Course Introduction
Introduction to the concepts discussed in the segment routing course.
3m
2
Segment Routing Overview
MPLS forwarding overview. SPRING concepts. Segment routing architecture. SDN and segment routing overview.
55m
3
Configuring Segment Routing
Segment types. Configuring, monitoring, and verifying segment routing. Configuring, monitoring, and verifying segment routing traffic engineering.

Lab: Configuring Segment Routing
5h 10m
4
Redundancy and High Availability
IP/MPLS protection mechanisms. TI-LFA. Link and node protection. Fate sharing. Label stacking for backup paths. Anycast segments. Segment routing with LAG.

Lab: Segment Routing Redundancy and High Availability
3h 50m
5
NorthStar Segment Routed LSPs
This module introduces how the Juniper NorthStar Application can be used to configure segment routing.
34m
$1,000 USD